RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 想問以下 hop-up 的重要性. 要換邊樣優先呢. [打印本頁]

作者: pskyng 時間: 2007-11-14 12:00
標題: 想問以下 hop-up 的重要性. 要換邊樣優先呢.
以次序, 應up 邊樣先呢.
1.Rear Anti-Roll Bar
2,萬向狗骨.(front swing shaft)
3.前單向管.( front one way tube.)
4.low frction 0既皮帶.
5.皮帶pully.

同想問下有同冇前單向對架車有咩影響?(我架係RTR)

作者: kaho0338 時間: 2007-11-14 12:06
first what car is it ?

i will change, 前單向 > 萬向

作者: pskyng 時間: 2007-11-14 12:17

原帖由 kaho0338 於 2007-11-14 12:06 發表

 登錄/註冊後可看大圖

first what car is it ?

i will change, 前單向 > 萬向

thanks 先 r,(我架係RTR 油車.am 控, 12級engine jar.

)
咁. 換左對架車有咩好0既影響?

作者: kaho0338 時間: 2007-11-14 12:36
前單向:
http://bbs.rc-evo.com/viewthread.php?tid=21237&extra=page%3D2

萬向:
http://bbs.rc-evo.com/viewthread ... ;highlight=%B8U%A6V
補充用左萬向會順d tim

作者: pskyng 時間: 2007-11-14 14:22

原帖由 kaho0338 於 2007-11-14 12:36 發表

 登錄/註冊後可看大圖

前單向:
http://bbs.rc-evo.com/viewthread.php?tid=21237&extra=page%3D2

萬向:
http://bbs.rc-evo.com/viewthread ... ;highlight=%B8U%A6V
補充用左萬向會順d tim

goood , 十分之唔該曬師兄. 等我細心研究下.

作者: justinwan 時間: 2007-11-14 14:36
萬向........

作者: chrishkyung 時間: 2007-11-14 16:08
the setting is more important than those hop-ups....

even installation of those hop-up, they cant help too much(if u have incorrect setting)

recommend u to try different settings first....So, I think the most important is tires, setting equipments, eg. setting plate, setting rulers, ...

作者: pskyng 時間: 2007-11-14 16:38

原帖由 chrishkyung 於 2007-11-14 16:08 發表

 登錄/註冊後可看大圖

the setting is more important than those hop-ups....

even installation of those hop-up, they cant help too much(if u have incorrect setting)

recommend u to try different settings first....So, I ...

humm. ic. thanks chris again, I should back to basic setting and theory and buy some setting equipments. . In fact , Hudy setting plate seem good. It suit for beginner? 有冇平小小架?..

作者: chrishkyung 時間: 2007-11-14 17:10
hudy setting plate around $150
downstop rulers around $200(speedmind)
camber gauge around $100(tamiya)

作者: yman 時間: 2007-11-14 17:33
3 racing or team c is cheaper

作者: pskyng 時間: 2007-11-14 17:46

原帖由 yman 於 2007-11-14 17:33 發表

 登錄/註冊後可看大圖

3 racing or team c is cheaper

原帖由 chrishkyung 於 2007-11-14 17:10 發表

 登錄/註冊後可看大圖

hudy setting plate around $150
downstop rulers around $200(speedmind)
camber gauge around $100(tamiya)

唔該曬呀師兄

. 有個價參考下至去看會好0的

.. 因為我見有0的店. 知你係新仔就"混你"

作者: micky 時間: 2007-11-14 18:41
2,3,1,4,5,

作者: pskyng 時間: 2007-11-15 17:35
thanks so much r 咁多位師兄.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)