RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: DT-02 MS [打印本頁]

作者: recargo 時間: 2007-12-25 16:02
標題: DT-02 MS
R

eady to play at TKO

作者: skyrobber 時間: 2007-12-25 16:06

原帖由 recargo 於 2007-12-25 04:02 PM 發表

 登錄/註冊後可看大圖

R eady to play at TKO

嘩@ @ 正墅.. 多 D 相 please

作者: recargo 時間: 2007-12-25 16:06
some more

作者: gibson 時間: 2007-12-25 16:09
Beautiful, now I know why this car sold out in few hours!!

作者: skyrobber 時間: 2007-12-25 16:11

原帖由 gibson 於 2007-12-25 04:09 PM 發表

 登錄/註冊後可看大圖

Beautiful, now I know why this car sold out in few hours!!

Gibson hing 你都有啦...

作者: recargo 時間: 2007-12-25 16:12

:P :P

作者: gibson 時間: 2007-12-25 16:14

原帖由 skyrobber 於 2007-12-25 16:11 發表

 登錄/註冊後可看大圖

Gibson hing 你都有啦...

No, I don't have this one!!

作者: Evo5 時間: 2007-12-25 17:11
any thing different to the DT-02 ?
apart from Metal shocks and push rod ??

作者: recargo 時間: 2007-12-25 18:16

原帖由 Evo5 於 2007-12-25 17:11 發表

 登錄/註冊後可看大圖

any thing different to the DT-02 ?
apart from Metal shocks and push rod ??

1.aluminum motor heat sink
2.ball differential.
3.universal shaft.
4.large dish wheels.
5.hi-torque servo saver.
6.beautiful sticker

作者: ryancmlam 時間: 2007-12-25 18:56
Bro Joe,

Very nice DT02MS. Let my DT02 race with your DT02MS at TKO then.

Ryan

作者: move7648 時間: 2007-12-25 20:35
Bro Recargo, what's the price for 02MS??

作者: recargo 時間: 2007-12-25 23:27

原帖由 ryancmlam 於 2007-12-25 18:56 發表

 登錄/註冊後可看大圖

Bro Joe,

Very nice DT02MS. Let my DT02 race with your DT02MS at TKO then.

Ryan

Ready and until my DT02 is exhausted.

[ 本帖最後由 recargo 於 2007-12-25 23:29 編輯 ]

作者: recargo 時間: 2007-12-25 23:28

原帖由 move7648 於 2007-12-25 20:35 發表

 登錄/註冊後可看大圖

Bro Recargo, what's the price for 02MS??

Hi Move Hing. it cost me $850

作者: recargo 時間: 2007-12-25 23:31

原帖由 skyrobber 於 2007-12-25 16:06 發表

 登錄/註冊後可看大圖

嘩@ @ 正墅.. 多 D 相 please

作者: li5115 時間: 2007-12-25 23:50

原帖由 ryancmlam 於 2007-12-25 18:56 發表

 登錄/註冊後可看大圖

Bro Joe,

Very nice DT02MS. Let my DT02 race with your DT02MS at TKO then.

Ryan

我又玩

作者: ryancmlam 時間: 2007-12-26 00:15

原帖由 li5115 於 2007-12-25 23:50 發表

 登錄/註冊後可看大圖

我又玩

Welcome Welcome

作者: go2usie 時間: 2007-12-26 00:46
wow~~~ cool~

i am considering one more buggy.... DT02MS or Hotshot...
i can see your car before my final decision~~

lets show the inside of your DT~

作者: go2usie 時間: 2007-12-26 00:48
joe , does it still available in any shop ?

when did u bought that ?

作者: li5115 時間: 2007-12-26 00:58
避震有改短嗎？

作者: recargo 時間: 2007-12-26 01:08

原帖由 go2usie 於 2007-12-26 00:48 發表

 登錄/註冊後可看大圖

joe , does it still available in any shop ?

when did u bought that ?

actually I got it 2 months ago.

作者: recargo 時間: 2007-12-26 01:09

原帖由 li5115 於 2007-12-26 00:58 發表

 登錄/註冊後可看大圖

避震有改短嗎？

Hi Leo Hing.

all original.

作者: recargo 時間: 2007-12-26 01:21

原帖由 go2usie 於 2007-12-26 00:48 發表

 登錄/註冊後可看大圖

joe , does it still available in any shop ?

when did u bought that ?

Hey man, if i remember well you have one T.losi which is rear power wor. take that to play/race with Mr Ryan, me

作者: go2usie 時間: 2007-12-26 02:32
yes i will ~~ i will fix it in these few days~~!

TKO 2WD party~~

作者: louischow 時間: 2007-12-26 03:04
標題: Jog Hing!
Your Car is very Beautiful!!!
After received the bonus from last Friday, I want to buy this car...
Finally...I buy Nintendo WII...
So no money to buy now la

作者: go2usie 時間: 2007-12-26 03:09
i think a bonus should be enough for both DT02MS and Wii ~~

作者: louischow 時間: 2007-12-26 03:16
標題: 回復 25# 的帖子
Yes... Can affort both...
But I need to control myself...because I have invest many money on my lazer!

:'(

作者: go2usie 時間: 2007-12-26 10:08
louis, Lazer is 4WD, DT is 2WD .... it is different , it is reasonable to buy a different type of buggy for play ...

i ve made u an excuse....

:lol

作者: recargo 時間: 2007-12-26 12:06

原帖由 louischow 於 2007-12-26 03:16 發表

 登錄/註冊後可看大圖

Yes... Can affort both...
But I need to control myself...because I have invest many money on my lazer! :'(

you can take all electronic parts to your new DT02 wor

. don't play wil wor, all bros must take you back
to TKO:lol :lol :lol

作者: rk2 時間: 2007-12-26 12:25

原帖由 recargo 於 2007-12-25 18:16 發表

 登錄/註冊後可看大圖

1.aluminum motor heat sink
2.ball differential.
3.universal shaft.
4.large dish wheels.
5.hi-torque servo saver.
6.beautiful sticker

All plastic parts the same as DT-02 ?

作者: maxchow 時間: 2007-12-26 13:28
我都諗緊買唔買 ...
我睇說明書D縲絲直接上落A-arm 個pin hold 度
個位係最受力，會唔會好容易爆？
以前玩媽星回力鏢就係因為咁 D A-arm 容易爆。
最後要DIY A-arm pin + E-ring 先解決倒。

作者: go2usie 時間: 2007-12-26 18:41
joe and ryan~ what type of motor will u use~ ?

作者: ryancmlam 時間: 2007-12-26 22:18

原帖由 go2usie 於 2007-12-26 18:41 發表

 登錄/註冊後可看大圖

joe and ryan~ what type of motor will u use~ ?

I use black pig. To me, and for a 2WD, a black pig is already very fast, faster than a 23T 4WD.

作者: recargo 時間: 2007-12-26 23:12

原帖由 rk2 於 2007-12-26 12:25 發表

 登錄/註冊後可看大圖

All plastic parts the same as DT-02 ?

Yes

作者: go2usie 時間: 2007-12-26 23:53
thanks ryan~
i will put a 540VZ motor to try try~
i m not sure how many turn it is .... it is came from Avante

作者: go2usie 時間: 2007-12-26 23:57
joe~ i know your car is new and powerful with full option~~ for fair play ~u are not allow to use moter less then 23T~~

作者: li5115 時間: 2007-12-27 00:01

原帖由 go2usie 於 2007-12-26 23:53 發表

 登錄/註冊後可看大圖

thanks ryan~
i will put a 540VZ motor to try try~
i m not sure how many turn it is .... it is came from Avante

540VZ
Usable voltage: 7,2V - 8,4V
Torque at best efficiency: 430g-cm (7,2V)
R.P.M. at best efficiency: 19.000rpm (7,2V)
Current drain at best efficiency: 14A (7,2V)
Best efficiency: 81% (7,2V)
Turns: 21 single - 0,8mm

[ 本帖最後由 li5115 於 2007-12-27 02:32 編輯 ]

作者: go2usie 時間: 2007-12-27 00:27
oh~ thanks Leo~~~

i do an unfair play tim...........

it is 21 turn....

since it can be work with 101bk esc... i thought that were over 25T ...

作者: recargo 時間: 2007-12-27 01:14

原帖由 go2usie 於 2007-12-26 23:57 發表

 登錄/註冊後可看大圖

joe~ i know your car is new and powerful with full option~~ for fair play ~u are not allow to use moter less then 23T~~

no worry, i have one black pig equipped.

作者: recargo 時間: 2007-12-27 01:16

原帖由 go2usie 於 2007-12-27 00:27 發表

 登錄/註冊後可看大圖

oh~ thanks Leo~~~

i do an unfair play tim........... it is 21 turn....

since it can be work with 101bk esc... i thought that were over 25T ...

21 turn ??

but your one is long time ago. I do not scare

作者: li5115 時間: 2007-12-27 02:33

原帖由 recargo 於 2007-12-27 01:16 發表

 登錄/註冊後可看大圖

21 turn ?? but your one is long time ago. I do not scare

This 540VZ was a 1986's product. it's 19,000rpm only but high torque.
Compare with today's 23T TZ or BZ(over 25,000rmp), it still a bit slow.
If this 540Vz in good condition, it must faster than the SportTuned(18,500rpm and 350g-cm).

My DT-02 fits with a BZ 23T.

[ 本帖最後由 li5115 於 2007-12-27 02:35 編輯 ]

作者: go2usie 時間: 2007-12-27 03:03
Leo~ if it is a tamiya 02H ne~~???

do u think it would be competitive with 23T ?

i have this too. please do me some advise~~~

作者: li5115 時間: 2007-12-27 03:41

原帖由 go2usie 於 2007-12-27 03:03 發表

 登錄/註冊後可看大圖

Leo~ if it is a tamiya 02H ne~~???

do u think it would be competitive with 23T ?

i have this too. please do me some advise~~~

Dynatech 02H (1989)
Torque at best efficiency: 413g-cm (7,2V)
R.P.M. at best efficiency: 25.000rpm (7,2V)
Current drain at best efficiency: 19,3A (7,2V)
Best efficiency: 74% (7,2V)
Turns (6513W):13 double - 0,65mm
Turns (7010W):10 double - 0,7mm
It's better than the 540VZ. Compare with the 26,500rpm BZ 23T, it still...

作者: rk2 時間: 2007-12-27 08:49

原帖由 recargo 於 2007-12-26 23:12 發表

 登錄/註冊後可看大圖

Yes

the quality of the plastic part is always a problem in Tamiya RC.

作者: minimini 時間: 2007-12-27 09:35

原帖由 rk2 於 2007-12-27 08:49 發表

 登錄/註冊後可看大圖

the quality of the plastic part is always a problem in Tamiya RC.

擺得太耐就會自動爆裂.........同 Losi 皮帶會自動分解一樣......

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)