RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: [LB] CUP車cup都傻, 有無計加長軸距? [打印本頁]

作者: teen 時間: 2008-4-22 10:16
標題: [LB] CUP車cup都傻, 有無計加長軸距?
不過佢4個車look都唔係6角形果隻. 頭look入邊係bearing黎
尾look係菊花頭

有無c-hing知道邊度有

adapter 同埋加長軸距既Estension賣? thanks!

作者: mikewu 時間: 2008-4-22 10:34
應該就無人出過........ 要改就改你自己慢D.... 師兄你用緊咩打????

作者: gibson 時間: 2008-4-23 00:20
I am playing LB, MP and WWII, both are running very nice!!

They don't have cup problem!!!

They run really good in off road!!

作者: faifai52 時間: 2008-4-23 01:10
yes, u must be running LB on-road la!

LB, MP & WW2 will cup4 if u run on-road, they run very good when off-road

作者: teen 時間: 2008-4-23 09:44
標題: 回復 2# 的帖子
just using Motor Included in the Kits

But my 3900 GP Nimh Battery make it very powerful

作者: teen 時間: 2008-4-23 09:48
yes, It is fine when running off-road

But sometimes I drive it in on-road

However, I wonder how you guys setup the shocks

hard front and soft rear? do you lower the height of the
car?

P.S. My paint job of the shell stripe so fast since

It always cup in on road. hurt me so much

作者: mikewu 時間: 2008-4-23 15:16

原帖由 teen 於 2008-4-23 09:48 發表

 登錄/註冊後可看大圖

yes, It is fine when running off-road

But sometimes I drive it in on-road

However, I wonder how you guys setup the shocks

hard front and soft rear? do you lower the height of the
car?
...

Honestly there is nothing you can do besides accept the fact that LB is not for high speed cornerings... Perhaps you should consider other choices like a buggy or even a on-road car........
Tamiya does make oil shocks for LB but they are useless in my opinion....

作者: courel500 時間: 2008-4-23 15:45

原帖由 teen 於 2008-4-22 10:16 發表

 登錄/註冊後可看大圖

不過佢4個車look都唔係6角形果隻. 頭look入邊係bearing黎
尾look係菊花頭

有無c-hing知道邊度有

adapter 同埋加長軸距既Estension賣? thanks!

是否照足書明書咁砌(一件不留)?

作者: mikewu 時間: 2008-4-23 16:26

原帖由 courel500 於 2008-4-23 15:45 發表

 登錄/註冊後可看大圖

是否照足書明書咁砌(一件不留)?

你識乜呀你..... 禁耐無玩車.....

作者: mlee 時間: 2008-4-23 16:57

原帖由 teen 於 2008-4-22 10:16 發表

 登錄/註冊後可看大圖

不過佢4個車look都唔係6角形果隻. 頭look入邊係bearing黎
尾look係菊花頭

有無c-hing知道邊度有

adapter 同埋加長軸距既Estension賣? thanks!

Recall there were a post about a week ago: there is a guy in US modified LB and even running brushless system. He did modified to his LB to 6角形 adapter. Try search older post...

作者: courel500 時間: 2008-4-23 18:14

原帖由 mikewu 於 2008-4-23 16:26 發表

 登錄/註冊後可看大圖

你識乜呀你..... 禁耐無玩車.....

哦 ! 咁好啦 , 我唔講啦 !

作者: terencelyl7411 時間: 2008-4-23 18:29

原帖由 courel500 於 2008-4-23 06:14 PM 發表 <a href="http://bbs.rc-evo.com/redirect.php?goto=findpost&pid=820317&ptid=78678" target="_blank"><img src="http://bbs.rc-evo.com/images/common/back.gif" border="0" alt="" /></a> 

 
哦 ! 咁好啦 , 我唔講啦 ! <img src="images/smilies/default/titter.gif" smilieid="9" border="0" alt="" />

作者: mikewu 時間: 2008-4-23 18:33

原帖由 courel500 於 2008-4-23 18:14 發表

 登錄/註冊後可看大圖

哦 ! 咁好啦 , 我唔講啦 !

快D整番部車車玩啦!

作者: courel500 時間: 2008-4-23 18:52

原帖由 mikewu 於 2008-4-23 18:33 發表

 登錄/註冊後可看大圖

快D整番部車車玩啦!

整緊中,想點玩?

作者: chacha 時間: 2008-4-23 18:53
玩得呢類型 ga 車一定係咁，如果唔想下下執車，換個甲蟲殼可能會好 D ，車頂夠圓可能會 look 返正

作者: vr2uhu 時間: 2008-4-24 18:04

原帖由 courel500 於 2008-4-23 18:52 發表

 登錄/註冊後可看大圖

整緊中,想點玩?

um??? what car ar?
can play in tai wo hau again?hehehe

作者: courel500 時間: 2008-4-25 11:20

原帖由 vr2uhu 於 2008-4-24 18:04 發表

 登錄/註冊後可看大圖

um??? what car ar?
can play in tai wo hau again?hehehe

RC 囉 , 我都唔知係咩車 ! 哈哈 !

作者: teen 時間: 2008-4-26 22:26
Where Can I get this?

http://www3.towerhobbies.com/cgi ... XN057&

[url=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXN057&

=7]http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXN057&

=7[/url]

[ 本帖最後由 teen 於 2008-4-26 22:28 編輯 ]

作者: leeho888 時間: 2008-4-27 01:51

原帖由 teen 於 2008-4-26 22:26 發表

登錄/註冊後可看大圖

Where Can I get this?

http://www3.towerhobbies.com/cgi ... XN057&

http://www3.towerhobbies.com/cgi ... XN057&

我有

作者: teen 時間: 2008-4-27 06:19

原帖由 leeho888 於 2008-4-27 01:51 發表

登錄/註冊後可看大圖

我有

Can You tell how do you get it?

作者: leeho888 時間: 2008-4-27 13:17
標題: 回復 21# 的帖子
去買HPI 2.2"鈴就會有

作者: teen 時間: 2008-4-27 13:38

原帖由 leeho888 於 2008-4-27 13:17 發表

 登錄/註冊後可看大圖

去買HPI 2.2"鈴就會有

邊度有得賣?

作者: leeho888 時間: 2008-4-27 13:46

原帖由 teen 於 2008-4-27 13:38 發表

 登錄/註冊後可看大圖

邊度有得賣?

快捷模型

作者: teen 時間: 2008-4-27 13:49

原帖由 leeho888 於 2008-4-27 13:46 發表

 登錄/註冊後可看大圖

快捷模型

thanks!!

不過有無相?

作者: leeho888 時間: 2008-4-27 14:00

原帖由 teen 於 2008-4-27 13:49 發表

 登錄/註冊後可看大圖

thanks!!

不過有無相?

咩相...?

作者: teen 時間: 2008-4-27 14:18

原帖由 leeho888 於 2008-4-27 14:00 發表

 登錄/註冊後可看大圖

咩相...?

我唔知HPI 2.2"鈴點既樣

作者: leeho888 時間: 2008-4-27 14:31

原帖由 teen 於 2008-4-27 14:18 發表

 登錄/註冊後可看大圖

我唔知HPI 2.2"鈴點既樣

http://www.hpiracing.com/hpiwheels/truck/
HPI d鈴雙星都啱裝

作者: teen 時間: 2008-4-27 14:44

原帖由 leeho888 於 2008-4-27 14:31 發表

 登錄/註冊後可看大圖

http://www.hpiracing.com/hpiwheels/truck/
HPI d鈴雙星都啱裝

登錄/註冊後可看大圖

Now available from HPI Racing are new wheels for 2WD and 4WD trucks in several colors and finishes! These wheels bolt right onto our popular Nitro Rush and Nitro MT kits, and will also fit most of the popular trucks on the market. Front wheels use 3/16 x 3/8 x 1/8 inch unflanged bearings. The rear wheels include adapters and washers to fit non-HPI trucks. 4WD truck owners will use the rear wheels for the front and rear.

係咪呢隻?

作者: leeho888 時間: 2008-4-27 22:34
標題: 回復 29# 的帖子
都啱裝.....

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)