RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: LRP AI電變有無得SET剎車架 [打印本頁]

作者: louis-wei 時間: 2008-5-2 13:43
標題: LRP AI電變有無得SET剎車架
我有只LRP AI pro ga電變，但是無開關，唔止敢，局得前同後，唔剎車，有唔人識點整啊，我想SET翻個剎車啊。

作者: courel500 時間: 2008-5-2 13:46
無得 set 呀 !

作者: ALEXANDER 時間: 2008-5-2 13:54
第一下brake,停車後兩秒先後波,點樣叫冇brake???
係咪你當個brake係後波呀!?

作者: Buildinglung 時間: 2008-5-2 13:56

原帖由 louis-wei 於 2008-5-2 13:43 發表

 登錄/註冊後可看大圖

我有只LRP AI pro ga電變，但是無開關，唔止敢，局得前同後，唔剎車，有唔人識點整啊，我想SET翻個剎車啊。

In my memory....無BREAK的! This is 低能 AI..... HAHA
you can set the 後波細D FOR BREAK....

[ 本帖最後由 Buildinglung 於 2008-5-2 14:05 編輯 ]

作者: louis-wei 時間: 2008-5-2 14:18

原帖由 Buildinglung 於 2008-5-2 13:56 發表

 登錄/註冊後可看大圖

In my memory....無BREAK的! This is 低能 AI..... HAHA
you can set the 後波細D FOR BREAK....

作者: jacobchu2007 時間: 2008-5-2 14:23

原帖由 Buildinglung 於 2008-5-2 13:56 發表

 登錄/註冊後可看大圖

In my memory....無BREAK的! This is 低能 AI..... HAHA
you can set the 後波細D FOR BREAK....

There is break when you first press reverse throttle. After you had break. push the throttle again, reverse mode. This is a very clever design for begginer, not a 低能. Of course, for expert, it is not enough. You should buy LRP quantum, LRP TC Spec as an expert.

作者: louis-wei 時間: 2008-5-2 14:41
敢個開關又點解決呢？只電變識無開關果波

作者: ALEXANDER 時間: 2008-5-2 14:54

原帖由 louis-wei 於 2008-5-2 02:41 PM 發表

 登錄/註冊後可看大圖

敢個開關又點解決呢？只電變識無開關果波

人地LRP呢隻就係標榜呢樣野,就係要冇掣,自動SET中位等等.......
你係咪二手買返泥架???
個盒都寫明"NO BUTTON",好心打開說明書睇下啦~

作者: cyken2512 時間: 2008-5-2 16:03

原帖由 ALEXANDER 於 2008-5-2 14:54 發表

 登錄/註冊後可看大圖

人地LRP呢隻就係標榜呢樣野,就係要冇掣,自動SET中位等等.......
你係咪二手買返泥架???
個盒都寫明"NO BUTTON",好心打開說明書睇下啦~

距嗰只就系二手货......

作者: louis-wei 時間: 2008-5-2 16:55
是2手GA，有说明全部英文所以無睇，所以唔多明，

作者: 長崎良尾 時間: 2008-5-2 16:59

我用過....剎車變後波...激死.....

作者: natural0112 時間: 2008-5-2 18:03

原帖由 長崎良尾 於 2008-5-2 16:59 發表

 登錄/註冊後可看大圖

我用過....剎車變後波...激死.....

我個frn用緊
個後波仲要係100% tim 正到死~

作者: calvinpun2000 時間: 2008-5-2 19:34
有刷就用個....簡直係BB AI~

作者: benz1850 時間: 2008-5-2 22:32
我用緊, 剎車唔知死左去邊, AI又冇野好set....激死, 我新野買番來

作者: Buildinglung 時間: 2008-5-3 00:37

原帖由 jacobchu2007 於 2008-5-2 14:23 發表

 登錄/註冊後可看大圖

There is break when you first press reverse throttle. After you had break. push the throttle again, reverse mode. This is a very clever design for begginer, not a 低能. Of course, for expert, it i ...

你有冇試過set 倒一下頂break...兩下後波先 ?????我就試過唔得law .......所以我先咁講佢低能 ........你set 倒教下大家丫 .....等我set返佢丫 ...而家無用放埋一邊咋 .....

作者: benz1850 時間: 2008-5-3 02:16

原帖由 Buildinglung 於 2008-5-3 00:37 發表

 登錄/註冊後可看大圖

你有冇試過set 倒一下頂break...兩下後波先 ?????我就試過唔得law .......所以我先咁講佢低能 ........你set 倒教下大家丫 .....等我set返佢丫 ...而家無用放埋一邊咋 .....

說明書話有, 但用起真係冇law....GTB 咁Q煩都set到,隻AI真係好野, 同捚我用Spectrum 接收, 唔知有冇影響

作者: jacobchu2007 時間: 2008-5-3 07:51

原帖由 Buildinglung 於 2008-5-3 00:37 發表

 登錄/註冊後可看大圖

你有冇試過set 倒一下頂break...兩下後波先 ?????我就試過唔得law .......所以我先咁講佢低能 ........你set 倒教下大家丫 .....等我set返佢丫 ...而家無用放埋一邊咋 .....

You just stop pressing the throttle, there will be break, motor. No need to set. If you want to reverse, press the throttle after break. It is very easy to use. No seeting needed.

作者: Buildinglung 時間: 2008-5-3 13:29

原帖由 jacobchu2007 於 2008-5-3 07:51 發表

 登錄/註冊後可看大圖

You just stop pressing the throttle, there will be break, motor. No need to set. If you want to reverse, press the throttle after break. It is very easy to use. No seeting needed.

Always in break condition when don't press throttle?????That means no break law!!!!!!!!!! HAHAHAHAHAHA!!!

作者: jacobchu2007 時間: 2008-5-3 22:57

原帖由 Buildinglung 於 2008-5-3 13:29 發表

 登錄/註冊後可看大圖

Always in break condition when don't press throttle?????That means no break law!!!!!!!!!! HAHAHAHAHAHA!!!

I thknk this is not no break. Almost all beginner ESC are set to break when stop press the throttle. Only high end ESC will have drag break, etc. If you want to use drag break. Buy a high end esc, such as Novak GTX, GTB, LRP Quantum Competition, etc. I have all these three. They will break nearly like a real car.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)