RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TA01 變身(還原)Top Force [打印本頁]

作者: ryancmlam 時間: 2008-5-4 16:55
標題: TA01 變身(還原)Top Force
所需配料
- TA01 兩架(因為Top Force係前後銖乂，TA01只有後銖乂，所己耍兩架TA01)
- 星星Manta Ray/ TA01 option ニ樓版 x 1
- Top Force (or Manta Ray) Part D x 2
- Top Force shell (多謝Susie兄幫手bid)
- 70mm狗骨 x 4
- 前80mm and 後90mm shocks (因為而現成shocks响手，用DF03原裝前後shocks. i.e. 前70mm and 後90mm)
- Buggy Tryes

作者: minimini 時間: 2008-5-4 16:56
woooooo..........lovely !!........

作者: agentjerry 時間: 2008-5-4 17:17

原帖由 ryancmlam 於 2008-5-4 16:55 發表

 登錄/註冊後可看大圖

所需配料
- TA01 兩架(因為Top Force係前後銖乂，TA01只有後銖乂，所己耍兩架TA01)
- 星星Manta Ray/ TA01 option ニ樓版 x 1
- Top Force (or Manta Ray) Part D x 2
- Top Force shell (多謝Susie兄幫手 ...

where u could find 2 old TA01?

作者: bigbigboy 時間: 2008-5-4 20:06
How much spend for your project?

作者: ryancmlam 時間: 2008-5-4 20:11

原帖由 bigbigboy 於 2008-5-4 20:06 發表

 登錄/註冊後可看大圖

How much spend for your project?

Shell = 350
Dog bone = 40 x 2
Part D ~ 40 x 2
Total = 510

作者: tamiyafan 時間: 2008-5-4 21:37
好車!但仲要配尾翼架喎。

作者: man2008 時間: 2008-5-4 21:39

原帖由 tamiyafan 於 2008-5-4 21:37 發表

 登錄/註冊後可看大圖

好車!但仲要配尾翼架喎。

Bro. Ryan
利害

作者: 1312 時間: 2008-5-4 23:39

原帖由 ryancmlam 於 2008-5-4 20:11 發表

 登錄/註冊後可看大圖

Shell = 350
Dog bone = 40 x 2
Part D ~ 40 x 2
Total = 510

not including wheel and tire ar

作者: ryancmlam 時間: 2008-5-5 01:13

原帖由 agentjerry 於 2008-5-4 17:17 發表

 登錄/註冊後可看大圖

where u could find 2 old TA01?

I bought them in 1993.

作者: ryancmlam 時間: 2008-5-5 01:14

原帖由 tamiyafan 於 2008-5-4 21:37 發表

 登錄/註冊後可看大圖

好車!但仲要配尾翼架喎。

The shell comes with 尾翼

作者: move7648 時間: 2008-5-5 09:20
may i know where can find 頭尾油壓架!??
thanks!

作者: go2usie 時間: 2008-5-5 09:42
Top Force - Type R ~~

the only 2 things missing are:

1: black gear box
2: bumper without body-mount holes

hurry Up ryan~~ i use to see your top force land on TKO next week~~~~

[ 本帖最後由 go2usie 於 2008-5-5 09:45 編輯 ]

作者: minimini 時間: 2008-5-5 09:57
bro Ryan........what color are you going to paint ??.......

作者: explorer888 時間: 2008-5-5 10:11
Good work Bro!

作者: ryancmlam 時間: 2008-5-6 09:53

原帖由 move7648 於 2008-5-5 09:20 發表

 登錄/註冊後可看大圖

may i know where can find 頭尾油壓架!??
thanks!

They come with the Tamiya option graphite 2-layer board kit

作者: ryancmlam 時間: 2008-5-6 09:55

原帖由 minimini 於 2008-5-5 09:57 發表

 登錄/註冊後可看大圖

bro Ryan........what color are you going to paint ??.......

I am thinking. I don't like to original green. However, for a vintage car, it should be in the "Tamiya planned" green.

Any idea ?

作者: go2usie 時間: 2008-5-6 09:55
explorer888 , have your evo arrived ~~~ ???

作者: neb 時間: 2008-5-6 10:11

原帖由 ryancmlam 於 2008-5-4 16:55 發表

 登錄/註冊後可看大圖

所需配料
- TA01 兩架(因為Top Force係前後銖乂，TA01只有後銖乂，所己耍兩架TA01)
- 星星Manta Ray/ TA01 option ニ樓版 x 1
- Top Force (or Manta Ray) Part D x 2
- Top Force shell (多謝Susie兄幫手 ...

師兄, 可以提供下你所買的Parts No.嗎?

作者: minimini 時間: 2008-5-6 11:38

原帖由 ryancmlam 於 2008-5-6 09:55 發表

 登錄/註冊後可看大圖

I am thinking. I don't like to original green. However, for a vintage car, it should be in the "Tamiya planned" green.

Any idea ?

yes.........the original green is ugly.......

if not following the original color scheme.....seems like missing something........

really a big big dilemma ar......

作者: go2usie 時間: 2008-5-6 12:43
ryan, try using the tamiya new released PC Spray color .... 電鍍green.

then, u can keep its green color theme ... and a bit modern then the original green~

作者: move7648 時間: 2008-5-6 13:39

原帖由 ryancmlam 於 2008-5-6 09:53 AM 發表

 登錄/註冊後可看大圖

They come with the Tamiya option graphite 2-layer board kit

is it mean original option for Top Force
no substitute??

作者: explorer888 時間: 2008-5-6 14:23

原帖由 go2usie 於 2008-5-6 09:55 發表

 登錄/註冊後可看大圖

explorer888 , have your evo arrived ~~~ ???

Yes!! With additional 4 brand new tires!! I want to use brushless, still thinking so no post recently! Also my NIB Vanquish has arrived, bravo!

作者: agentjerry 時間: 2008-5-6 19:43
標題: 回復 22# 的帖子
bro
u're the father of vintage running buggy !!!!!!!!!!!!!!!!!!!1

作者: move7648 時間: 2008-5-16 14:23
Bro Ryan

could you please check with your Top Force and DF03
and advise if the front universal can use the same?

thanks!!

作者: stig 時間: 2008-5-16 14:26
諗好用咩色未啊ryan兄 =]

作者: ryancmlam 時間: 2008-5-16 19:49

原帖由 move7648 於 2008-5-16 14:23 發表

 登錄/註冊後可看大圖

Bro Ryan

could you please check with your Top Force and DF03
and advise if the front universal can use the same?

thanks!!

Bro move7648,

1. The front hub of TA01 (in either red or black) and Top Force are the same. This front hub is designed for putting 2 5x11mm bearings to hold the dog bone cup or universal. You can put the DF03 dog bone in Top Force and, of course, can put the DF03 universal drive shaft in Top Force.

2. The front hub of TA02 (in either blue or black) is same as the one in CC01 / FF01. It is designed for putting 1 5x11mm bearing and a 10x15mm bearing to hold the dog bone cupe or universal.

作者: move7648 時間: 2008-5-16 22:49

原帖由 ryancmlam 於 2008-5-16 07:49 PM 發表

 登錄/註冊後可看大圖

Bro move7648,

1. The front hub of TA01 (in either red or black) and Top Force are the same. This front hub is designed for putting 2 5x11mm bearings to hold the dog bone cup or universal. You c ...

所以話 : 出外靠朋友
Bro Ryan, thank you so much the useful information!!

作者: ryancmlam 時間: 2008-5-16 22:51

原帖由 stig 於 2008-5-16 14:26 發表

 登錄/註冊後可看大圖

諗好用咩色未啊ryan兄 =]

As a vintage car, I think I have no choice, go for the ugly Tamiya planned green.

作者: stig 時間: 2008-5-16 23:06

原帖由 ryancmlam 於 2008-5-16 22:51 發表

 登錄/註冊後可看大圖

As a vintage car, I think I have no choice, go for the ugly Tamiya planned green.

agreed, vintage car should paint with its own colour,
i used to think top force and 魔鬼魚 are both look really nice when i was a child, and the "ugly green" is not that bad, i have a M01 Mini with that ugly green

作者: minimini 時間: 2008-6-8 23:31
just saw yahoo.jp have one Top Force Evo for sale..........

http://page18.auctions.yahoo.co.jp/jp/auction/w25419548

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)