RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 想問問 2.4 g ... [打印本頁]

作者: tivoli 時間: 2008-5-11 19:16
標題: 想問問 2.4 g ...
如果出 2.4g 想玩返 mini-z, 因為之前 ad 都 jam 得好勁..

如果出 2.4g, 係一定要玩 AWD ? 依家無人玩 02 同 015 架啦 ?
係唔係一定用要 10 仔 ..? 依家 10 仔全新咩價位 ?
KOPROPO 有無打算出新款槍控 ? 10 仔都... 出左好耐.. ESPRINT ( 棍仔 ) 都出左新版 ...

唔該哂各位

作者: 800mah 時間: 2008-5-11 20:08
10仔 or EX1-UR 都得.
再唔係用kyosho支 2.4G 雞控啦,

作者: GTRTam 時間: 2008-5-11 22:52
而家我見, 車場上大部份 2.4Ghz 都係 02. 見過有位師兄改左 2.4Ghz AWD. 其實除左 servo motor, VR 線短 D, 基本上 2.4Ghz AWD PCB 同 02 係應該無分別.

015 有呀, 得我一架 law.

KoPropo 最新係 EX1UR. 雖然外形同以前D一仔一樣, 但 functions 就唔同左. QuickR 係賣點, 我架 015 加 50% throttle QuickR, 好似叠左 FET. 有師兄較 steering QuickR, 佢話好似減左 6 - 7 度呔gum wor.

師兄話 EX1UR 反應比 10 仔快, 合 KoPropo 講話 CPU 快 30% 理論. 我都用緊EX1UR 2.4Ghz, 但放左枝 10 仔好耐無得比較, 唔敢講. 但無論 EX1UR 2.4Ghz 或之前用 Kyosho 原裝 KT-18 2.4Ghz 控, 未試過 jam 車, 我比100分.

作者: samy 時間: 2008-5-11 23:31
but the pcb is different due to the 2.4Ghz button placement and the shocket (link to set-up tool).

作者: GTRTam 時間: 2008-5-12 02:56
Yes samy. The top cover is different since no crystal & I.C.S plug is on top now. You have to cut out the old one or order the new cover from Japan.

http://www.pro-s-futaba.co.jp/st ... mp;products_id=7056

but now sold out in Pro Shop Futaba.

Anyway, I think it's quite easy to modify the old cover to fit in. It's just a question of apperance. So Samy. Get one whole 2.4Ghz set first, play til July the hong goods come in & you can buy the 2.4Ghz module. Believe me, I'm much faster now than before since I use the 2.4GHZ mini-z module & EX1UR.

[ 本帖最後由 GTRTam 於 2008-5-12 03:12 編輯 ]

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)