RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Drifting Servo... [打印本頁]

作者: iggihk 時間: 2008-7-14 21:14
標題: Drifting Servo...
What is a good and cheap servo for Drifting??
Futaba 3003/3005?
Hi-Tec 625/645?

does drifting Servo require high response speed? high torque? or digital??

or Drifting doesnt need good servo at all??

thinking what servo to get for my TA05 Drift...(dont want to get expensive digital...)

作者: tomatob 時間: 2008-7-15 12:42
3003都夠用,drift 車唔使要太快既servo

作者: ming0916 時間: 2008-7-16 00:03

原帖由 tomatob 於 2008-7-15 12:42 發表

 登錄/註冊後可看大圖

3003都夠用,drift 車唔使要太快既servo

但當你試過用勁既SErvo就知分別

作者: lobster 時間: 2008-7-16 01:42

原帖由 ming0916 於 2008-7-16 00:03 發表

 登錄/註冊後可看大圖

但當你試過用勁既SErvo就知分別

作者: 北極熊 時間: 2008-7-16 01:50
KO 2413

作者: chr 時間: 2008-7-16 02:03
try try bluebird sevro

作者: iggihk 時間: 2008-7-16 02:10
I tried Hi-tec 645
and using a China Towerpro Digital Servo now
thinking if I need to get a slightly better servo..

Bluebird is also high torque but slow response right?

作者: chr 時間: 2008-7-16 02:32
頭先上blue brid睇過我之前用過果隻BMS631MG,覺得都ok
Torque At 4.8V: 5.0kg-cm , 69 oz-in
Torque At 6.0V: 16.2kg-cm , 89 oz-in
Speed At 4.8V: 0.10 sec / 60° at no load
Speed At 6.0V: 0.08 sec / 60° at no load
http://www.blue-bird-model.com/Chinese/index2.htm

作者: 烈火之魂 時間: 2008-7-16 12:05
平平地用9550啦~~又細唔太慢~~
可惜跟唔到手指~~~