RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 想問BRUISER [打印本頁]

作者: ftbingobingo 時間: 2008-8-12 12:48
標題: 想問BRUISER
有無兄弟有山豬波箱的爆炸圖? 同埋除EBAY之外有咩網多零件賣(覆製也可), 另外想問問, 頭輪是否有單向的? THANKS

[ 本帖最後由 ftbingobingo 於 2008-8-12 17:56 編輯 ]

作者: Sin 時間: 2008-8-12 13:47
try this link, it's the service manual for the Tamiya Mountaineer / Bruiser gearbox in pdf format

:

http://kope.com/bruiser/TrannySvcManual.pdf

作者: wave 時間: 2008-8-12 13:47
頭輪是有單向

作者: ftbingobingo 時間: 2008-8-12 13:52
THANKS BROTHERS

作者: go2usie 時間: 2008-8-12 15:11
frankie, u have bought a BRUISER ?

作者: kchx2 時間: 2008-8-12 15:24

原帖由 Sin 於 2008-8-12 13:47 發表

 登錄/註冊後可看大圖

try this link, it's the service manual for the Tamiya Mountaineer / Bruiser gearbox in pdf format :

http://kope.com/bruiser/TrannySvcManual.pdf

好厲害

一個普通人都唔會拆開既波箱
拆開左好難砌番埋
佢居然拆開逐 part 研究寫介紹
仲寫成 25 頁咁多
好似d工業用機器既說明書咁

爆炸圖我都係以前在砌 mountaineer 果時在某個細盒表面見過
呢本真係每個 bruiser 車主都應該收藏既經書

[ 本帖最後由 kchx2 於 2008-8-12 15:26 編輯 ]

作者: buggy 時間: 2008-8-12 15:29
我個都拆開1年都未得閒砌翻埋。唔知我砌唔砌得翻。哈哈。買翻d bearing先。

作者: Sin 時間: 2008-8-12 15:51
標題: 回復 6# 的帖子
Explored view as below:

http://kope.com/bruiser/Exploded.pdf

作者: ftbingobingo 時間: 2008-8-12 16:14

原帖由 go2usie 於 2008-8-12 15:11 發表

 登錄/註冊後可看大圖

frankie, u have bought a BRUISER ?

Yes, 玩到無野好玩

作者: ftbingobingo 時間: 2008-8-12 16:16

原帖由 Sin 於 2008-8-12 15:51 發表

 登錄/註冊後可看大圖

Explored view as below:

http://kope.com/bruiser/Exploded.pdf

唔該晒, 要諗諗去唔去挑戰難度

作者: alexfish3 時間: 2008-8-12 16:20
標題: 回復 9# 的帖子
I want to 玩玩 too.

作者: denden 時間: 2008-8-12 17:13
I have modded bearings inside the tranny too, not too difficult just follow the pdf step by step, but there are arond 4 850 bearings cannot replaced unless you have special machine. next target is to get a 1981 hilux and do the same. bearings you can buy in local shop or goes to http://www.rcrockcrawling.com/product_info.php?products_id=371

作者: ftbingobingo 時間: 2008-8-12 17:55

原帖由 denden 於 2008-8-12 17:13 發表

 登錄/註冊後可看大圖

I have modded bearings inside the tranny too, not too difficult just follow the pdf step by step, but there are arond 4 850 bearings cannot replaced unless you have special machine. next target is to ...

Hi, brother, does the bearing set include the special bearing inside the tranny?

作者: denden 時間: 2008-8-12 18:02
yes it includes all including the tranny but excluding the 4 bearings for wheel hub

作者: ftbingobingo 時間: 2008-8-12 18:19

原帖由 denden 於 2008-8-12 18:02 發表

 登錄/註冊後可看大圖

yes it includes all including the tranny but excluding the 4 bearings for wheel hub

thanks brother, 我想訂一堆野, 有無兄弟一齊訂慳番d郵費?

作者: denden 時間: 2008-8-12 18:28
I might order sth but not now, I need to wait for the confirmation of the 1981 hilux 1st. Can you wait?

作者: ftbingobingo 時間: 2008-8-12 18:57

原帖由 denden 於 2008-8-12 18:28 發表

 登錄/註冊後可看大圖

I might order sth but not now, I need to wait for the confirmation of the 1981 hilux 1st. Can you wait?

brother pls PM your phone no. to me to discuss

作者: peter7 時間: 2008-8-12 22:10
If any brother has problem with the gearbox, let me know. I may be able to help.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)