求救~~set唔到個Futaba MC330CR電變呀~

原帖由 RSW 於 2006-9-3 01:58 AM 發表
說明書都係咁講，但我已經照足，但係又冇果d confirmation signal(beep一聲，我估), 最後尾果一下又唔會停左盞燈，真係俾佢激死~~~
佢又話有connect到摩打先有beep聲，但我又唔似駁錯線，又睇唔到佢有燒電變的跡 ...

Beep sound from motor.

it may has no single

Channal 1 is servo, channal 2 is esc........what is your receiver.????

[ 本帖最後由 Mobility 於 2006-9-3 02:45 編輯 ]

原帖由 evo2005 於 2006-9-3 02:59 AM 發表

而家可能個接收以經.................

Old School receiver

ESC, Receiver and Servo not match....

i guess......receiver gone! servo gone!

原帖由 RSW 於 2006-9-3 03:24 AM 發表
AMAT兄，咁個電變點呀?係咪都瓜埋喇?佢唔駛開關都o係度叫~~~~

換接收都預左，不過冇諗過o係呢個情況下換~~因為有諗過買FM控，再玩下其他車種~~
個接收係買呢架二手車果陣跟埋，可能年代比較久遠啦~~

換f ...

as long as you can hear beep sound from ESC......you still have hope