新手報到

回復 1# 老M


    Wellcome on board ^^
    It is a nice car. There will be many 2WD cars on coming SAT at JV. See if you could join the party ^^

    x ray依架係唔係 唔洗換野都用到2s lipo ?  原裝係跟幾多pitch?
lung_zmc 發表於 2011-2-23 03:37

                               
登錄/註冊後可看大圖

1. Yes
2. 64 pitch, 96T

    其實 用2s 係唔係會太快 我見有d ching 都係用1s ?
lung_zmc 發表於 2011-2-23 04:33

                               
登錄/註冊後可看大圖

    Hello Ching, do you mean 1S on 1/12 pan car?
    Taking JV as example, the majority of 1/10 pan car players using 2S Lipo ^^

回復  mikuro

   
    正在努力當中....
老M 發表於 2011-2-23 12:41

                               
登錄/註冊後可看大圖

加油, see you at JV soon ^^

回復  mikuro


    想問下如用speedpassion esc 和8.5R 應該用多少ratio??
老M 發表於 2011-2-23 17:08

                               
登錄/註冊後可看大圖

    Assume you will run your 1/10 pan car with 62mm dia. rear tires, you may try 20/96 - 64pitch which give the roll-out about 40.5mm/rev. Taking LRP 8.5T as an example, the suggested figures would be around 39-41mm/rev.
      Also, some of the useful figures had been provided by Ching here. You can check it out.
   Indeed, I will test my pro-ten as well and will try to get more data for reference.

回復  mikuro


    明白 thx ching 依架野  係邊到有 今日22 /f 唔見有
lung_zmc 發表於 2011-2-23 20:02

                               
登錄/註冊後可看大圖

    I saw one at 1/F last monday but I guess it was sold now. You may check with "redstar" or "有幫".

Good and you have the new MT-4 as well ^^
Hope to see in JV soon !