加入truggy 行列

I wonder how much is it in HK?

Does the Truggy version come in RTR?

I actually like the idea of "plastic" chassis brace, worst case, that piece of plastic break, may be $20HKD or so ...  but with big strong Metal chassis brace, you may bend the chassis, break the arms/tower/ etc before the brace ...  

It really depends how you play, for track/race, you want a very stiff chassis, for bashing/jump high, you want a bit flexibility ..

Somehow, my Truggies with alloy brace, (Serpent/Hpi/Losi/Mugen etc .. ) all result with broken arm/mount/hub/tower etc ...

Actually, with "turnbuckle" is the best, probably just pop out under big jump/hit!

(something like this http://www.pmhobbycraft.ca/RC8-CHASSIS-BRACE-SET-REAR-ASC89069/)

You can actually run 5s, I like 5s a lots, (if you use 1800kv) especially for the T8, the motor side is heavier then the other side, so you can run 3s on one side, 2s on the motor side, to balance it off.

Let's say 4000 mah, 3s is app 350g .. 2s is 250g ...  

The CVD part... Very true...  Esp the rear one....

I still wonder why 1/8 don't use '二樓版' as 1/10 ... Even a small narrow carbon or alloy.. On nitro, may be hard, but on electric, should be fine to locate....

The CVD part... Very true...  Esp the rear one....

I still wonder why 1/8 don't use '二樓版' as 1/10 ... Even a small narrow carbon or alloy.. On nitro, may be hard, but on electric, should be fine to locate....