慢爬機械獸(鞋子回來了,更新回來了)

原帖由 deadmatch 於 2009-2-8 20:01 發表

                               
登錄/註冊後可看大圖

firs drill many many holes, 跟住用把鑼刀鑼返條線.

what is 鑼刀? would u mind to take a photo??

原帖由 powis 於 2009-2-8 21:40 發表

                               
登錄/註冊後可看大圖

what is 鑼刀? would u mind to take a photo??

No problem, show to you TMR

Brother deadmatch, if you have time would you mind to take the photo of ur equipment and 鑼刀 for making your parts? if it is not too big and expensive, i also consider to buy to make my parts too! thanks!

sorry for bro powis.....this week i just get crazy workload on studying and working.
by the way, i can tell something about 鑼刀 to you first.
actually it just like a drew and just like a pen size.
i got one very cheap in SSP about 6 dollars.
Photos will be updated later.
sorry

師兄,我以前都有玩慢爬,有以下意見
1)中軸不夠強度,太弱...中石Bye bye
2)放電及車身位不要太重,會"cup"車,因爬石有時角度很大,雖然你2擔很重都有帮助

原帖由 pantherjovi 於 2009-2-12 09:51 發表

                               
登錄/註冊後可看大圖

師兄,我以前都有玩慢爬,有以下意見
1)中軸不夠強度,太弱...中石Bye bye
2)放電及車身位不要太重,會"cup"車,因爬石有時角度很大,雖然你2擔很重都有帮助

謝師兄意見.
1)膠中軸的強度真是....你說得對.我會找找金屬的.
  但還是用著住....k.o.左先換吧.
2) 我明白會"cup車所以設計上己有注意.
謝師兄寶貴的意見a.

原帖由 deadmatch 於 2009-2-12 09:40 發表

                               
登錄/註冊後可看大圖

sorry for bro powis.....this week i just get crazy workload on studying and working.
by the way, i can tell something about 鑼刀 to you first.
actually it just like a drew and just like a pen size.
...

Is ok brother! i think i know what the 鑼刀 is now.
So you just drill a hole, then change to use 鑼刀 to "鑼" the line from the hole?

原帖由 powis 於 2009-2-12 14:37 發表

                               
登錄/註冊後可看大圖

Is ok brother! i think i know what the 鑼刀 is now.
So you just drill a hole, then change to use 鑼刀 to "鑼" the line from the hole?

yes. and then make the line smooth.

原帖由 deadmatch 於 2009-2-12 17:32 發表

                               
登錄/註冊後可看大圖

yes. and then make the line smooth.

要超有心机,耐性...

原帖由 deadmatch 於 2009-2-12 17:32 發表

                               
登錄/註冊後可看大圖

yes. and then make the line smooth.

wow, how you can hold the part stable when you are "鑼"ing ???

原帖由 powis 於 2009-2-12 19:01 發表

                               
登錄/註冊後可看大圖

wow, how you can hold the part stable when you are "鑼"ing ???

我只是一個粗暴的人....所以只用手.

原帖由 bcgg 於 2009-2-12 17:49 發表

                               
登錄/註冊後可看大圖

要超有心机,耐性...

可以培養耐性和健身

冇耐性...有野睇未呀!

給點耐性....給點耐性.....

個轆好似細得濟....
唔太o岩比例...
試下supersize

看來我都要買套super size 的輪子和呔來試試了.

用邊款?

不太明白前桥改单轮的独立悬架结构有啥好处 。。。

改变动态性能还是  ？ 。。。 轮子是圆的啊 。。。怎么扭也不会改变它本身的特性啊 。。。

原帖由 havenlau 於 2009-2-17 11:09 發表

                               
登錄/註冊後可看大圖

個轆好似細得濟....
唔太o岩比例...
試下supersize

又唔駛supersize!

原帖由 deadmatch 於 2009-2-17 13:19 發表

                               
登錄/註冊後可看大圖

看來我都要買套super size 的輪子和呔來試試了.

我有個見議!