BLS 352好定ORION既VDS-2612HV好???

BLS 352
Speed:0.15sec/60° (at 6.0V)
Torque:18.0kg．cm (at 6.0V)

VDS-2612 HV
Speed: 0.12 sec/60°
Torque: 362 oz/in (26 kg/cm)

一隻就大力D又快D又便D,不過未用過ORION  D SERVO
一隻出名野,行無刷,用過351,唔錯,不過好(肯)貴,有無C兄俾D意見,用黎轉向

Hitec HS-7945TH     Titanium Gear Train (MK first gear)
Speed (6.0V/7.4V):        0.12 / 0.10 second @ 60°
Torque oz./in. (6.0V/7.4V):        250 / 319
Torque kg./cm. (6.0V/7.4V):        18.0 / 23.0

Hitec HS-7954SH   Steel Gear Servo
Speed (6.0V/7.4V):        0.15 / 0.12
Torque oz./in. (6.0V/7.4V):        333 / 403
Torque kg./cm. (6.0V/7.4V):        24.0 / 29.0
Spare Parts

• 55321 - Gear Set
• 55414 - Case Set
  

Hitec HS-7980TH   Titanium Gear Servo
Speed (6.0V/7.4V):        0.20 / 0.17
Torque oz./in. (6.0V/7.4V):        500 / 611
Torque kg./cm. (6.0V/7.4V):        38.0 / 46.0

HS-M7990TH Mega Torque HV Magnetic Encoder Servo       Titanium Gear Train (MK first gear)
Speed (6.0V/7.4V):        0.20 / 0.17
Torque oz./in. (6.0V/7.4V):        500 / 611
Torque kg./cm. (6.0V/7.4V):        36 / 44

BLS 451
10.6kg
0.01sec
below $700
i am using on 1:8 轉向, good enough

0.15 sec too slow

HITEC 好用D???
Hitec HS-7954SH   Steel Gear Servo
Speed (6.0V/7.4V):        0.15 / 0.12
Torque oz./in. (6.0V/7.4V):        333 / 403
Torque kg./cm. (6.0V/7.4V):        24.0 / 29.0
Spare Parts•55321 - Gear Set
•55414 - Case Set

依隻好似唔錯

24kg is mostly aim for 1:8 buggy
Futaba is very reliable with reasonable price

Hitec, no comment.
Or u can choose Savox with better price

Savox  1256 !!