FXXD-S 後波箱安裝問題

在安裝後波箱時，5x10 啤零完全唔岩位放入波箱個圓隆（太大）如圖，請問有無師兄教下我點安裝？

what about the 8x14 bearing? focusing on the 1 suppose in the casing, i believe 5x10 bearing for the other purpose.

我覺得個殼有問題, 我上網見到個波箱殼應該好似le張圖咁

u seems right, check this out:
MST FXX Aluminum Rear Gear Box
send it back to where u bought.

Yes thanks, I already send email to rcmart. Waiting their reply.

D位啱啱好，細心安裝

albert0329 發表於 2015-6-8 13:27
D位啱啱好，細心安裝

師兄個波箱殼個隆真係大左, 唔岩放10x5啤鈴, 我懷疑佢原裝比錯le款殼, 當然無金屬件

有大有細各1粒，頭尾1粒喎

albert0329 發表於 2015-6-8 14:54
有大有細各1粒，頭尾1粒喎

咪就係個隆內外同一個size(8x14 啤鈴size), 但係啤鈴兩粒兩個size, 5x10果粒唔岩位放。

第一張圖就係佢比我個殻

henry630 發表於 2015-6-8 15:33
第一張圖就係佢比我個殻

咁有機會錯件，攞去換La

RC媽話問緊廠商，點解我咁黑仔架～

mst俾錯件既機會好多喎, 我同frd每人買左部fxxds。2部都係前臂介子唔啱位, frd果部仲要無左電池底塊海棉

其實我部都係前臂介子唔岩位，上youtube都有人講過，le個位唔係太影響所以算數，但係波箱殻唔換返真係無得玩，無奶油比錢買鋁合金架

有個強化波箱唔80蚊倒炸, 不過又真係無理由比錢再買

Hey mate, I believe MST comes with 2 different version of gear case, 1 is as shown in your construction guide, the other 1 is the 1 you have at the moment, but it should comes with the metal collar (silver color), check this out MST gear gear) and try to find this guy in your kit, if you can't find it, they really need to replace your parts.  

yakuza 發表於 2015-6-9 14:07
Hey mate, I believe MST comes with 2 different version of gear case, 1 is as shown in your construct ...

confirmed with rcmart, MST will replace a correct gear box to me.  Thanks mate.