M03R + roll bar ~

any brother been put a roll bar on your M03R ??

其实甘多位师兄,我想问一下~~M03装M04嗰SET防倾杆,可吾可以解决装佐M03既防倾杆后既转向不足呢??????????

let me try try sin ~~

You can put anti roll bar in M03R, just need to bend the bar a little towards inside of the car.
It works pecfect! Won't hit 推桿. Also use the option ball head, it is smaller.

原帖由 lespaul 於 2007-5-1 01:09 發表



You must be the bro in the legend said with a cold hand!!

that can make perfect tiramizu!!  

失禮晒 ,perfect就no la

原帖由 mmz 於 2007-5-1 00:35 發表


由始至終,我都有用,不過都想試下唔裝

You must be the bro in the legend said with a cold hand!!

that can make perfect tiramizu!!  

原帖由 billyho 於 2007-4-30 23:17 發表

但係果日我前後都裝左 , 未試過CUP 4 播

由始至終,我都有用,不過都想試下唔裝

原帖由 billyho 於 2007-4-30 23:17 發表

但係果日我前後都裝左 , 未試過CUP 4 播

你勁嗎 ! 死都可以救返生 !

原帖由 courel500 於 2007-4-30 16:00 發表

其實我覺得都係因應場地而定啦 ! 好似我地係 TWH 玩咁 , 10 架有 10 架都唔裝 Roll Bar !

但係果日我前後都裝左 , 未試過CUP 4 播

原帖由 gibson 於 2007-4-30 16:34 發表



Because of this, can I get the refund from Tamiya!!  

I think that's the reason why the anti-roll bars are not included in the M03R car kit ........so........ you are not supposed to install it......

原帖由 kaho0338 於 2007-4-30 16:32 發表
今e個算係tamiya design 上既失誤?

but new 轉向杯's ackermann is really better

原帖由 教主 於 2007-4-30 17:10 發表
用番舊款轉向杯味用得 roll bar law~~  

好彩我散砌出來個架都係用返舊款轉向杯 !

用番舊款轉向杯味用得 roll bar law~~  

咁如果玩地毯場, 真係要裝咁點呀?

原帖由 gibson 於 2007-4-30 16:34 發表



Because of this, can I get the refund from Tamiya!!  

you dont install roll bar and you will be fine~~

原帖由 教主 於 2007-4-30 16:27 發表
就是那個轉向杯的 "lone" 頂住 roll bar  & 導至轉向不足~  

Because of this, can I get the refund from Tamiya!!  

今e個算係tamiya design 上既失誤?

原帖由 教主 於 2007-4-30 16:07 發表
查實我係想話過你地知 M03R 係加吾到 Roll Bar 架~~~  

這個教主真鬼馬

就是那個轉向杯的 "lone" 頂住 roll bar  & 導至轉向不足~  

原帖由 kaho0338 於 2007-4-30 03:48 PM 發表
quote 返觀星 答案:

一定唔可以落 anti-roll bar ! cup 到 PK !
而呔太咬又係易 cup
servo 太快架車轉得太急太 "chok" 又係易 cup

我試過m03m真係盒cup4 的, m03r 我估冇乜大分別瓜

Why 落 anti-roll bar 會 cup 到 PK ??
anti-roll bar suppose 等架車唔Roll ??
then why cup 呢??