RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 想請教各位有關星星1/10青蛙... [打印本頁]

作者: python 時間: 2006-5-13 09:29
標題: 想請教各位有關星星1/10青蛙...
心思思想買架星星1/10青蛙, 想請教各位, 呢架車個尾懸掛, 假如bump埋欄( 高速例外), 會唔會好易爛, 因為睇落好似無A臂0甘扎實, 另外, 前輪轉向upright, 應該係馴馬師果款, 係唔係好易斷? 可唔可以換裝星星尼龍質料(即係草蜢用緊)果款upright? 有無師兄玩過, 敬請指教.

作者: RCman 時間: 2006-5-13 10:42

原帖由 python 於 2006-5-13 09:29 發表
心思思想買架星星1/10青蛙, 想請教各位, 呢架車個尾懸掛, 假如bump埋欄( 高速例外), 會唔會好易爛, 因為睇落好似無A臂0甘扎實, 另外, 前輪轉向upright, 應該係馴馬師果款, 係唔係好易斷? 可唔可以換裝星星尼龍質料 ...

其實佢個rear Arm欄就吳會好易欄，不過玩的多兩邊係金屬碼果個位就好易"seat"及至有"虛"位。
而前面果部分同Grasshopper係兩回事。算把啦！
比你玩到都無parts比你換啦

作者: peter7 時間: 2006-5-13 10:47
The new Frog 前輪轉向upright use thicker material so it is a bit stronger than the old one.

作者: python 時間: 2006-5-13 10:49
Oh, I c, Thanks to all.

作者: gibson 時間: 2006-5-13 16:04
I brought one for daily runner, tamiya had modified the gear box make it running very smooth. If you like it just go ahead, you will like to run it off road. Cheers.

作者: python 時間: 2006-5-15 13:37
唔該晒

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)