Kyosho TF5s photo gallery - RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

DSC_6243.jpg (322.16 KB, 下載次數: 10)

TF5s

2011-3-28 08:31 上傳

My legacy TF5s is now repaired with carbon chassis and upper deck from 3Racing (Original plastic tub was broken).

Still deciding which motor and ESC to use though. To be continued next week....

作者: rk2 時間: 2011-3-28 08:57
i like Kyosho, too.

作者: yakuza 時間: 2011-3-28 09:08
Kyosho used to very good, but less and less spare parts in the market these days.

作者: wiggles 時間: 2011-3-28 10:23
真的唔Ng多而且偏貴，幸好市面上有代用零件但要訂.

作者: hkwcc00 時間: 2011-3-28 11:14
Kyosho平跑真係幾罕見

作者: wiggles 時間: 2011-3-28 14:50
回復 5# hkwcc00

TF5s is not a very strong car.  As mentioned previously the plastic tub was broken and this happened only after a few rounds at JV due to my newbie driving style.

The Lexus SC430 body is quite nice however.

I was going to buy EP Fazer last year but all KWS shops ran out of stock at the time.  Hung Sing boss suggested that I should go for this. I should have waited....

Anyway, I don't want to waste this car and hence got the 3Racing part.  I hope the new carbon chassis will be able to give this car a second life. hehe.

作者: antison 時間: 2011-3-28 16:58
睇個樣好似幾得下咁喎。

作者: 八旗統帥 時間: 2011-3-28 18:20
應該都跑得下

作者: wiggles 時間: 2011-3-28 23:56
Almost done. Most of the electronics are now in place. Just missing a new receiver.

登錄/註冊後可看大圖

DSC_6247.jpg (172.29 KB, 下載次數: 11)

下載附件

2011-3-28 23:53 上傳

登錄/註冊後可看大圖

DSC_6249.jpg (251.92 KB, 下載次數: 10)

下載附件

2011-3-28 23:54 上傳

作者: BigCat 時間: 2011-3-31 03:30
請問零件難唔難買呀 ? 師兄

作者: wiggles 時間: 2011-3-31 23:37
回復 10# BigCat
Dear BigCat,

I find that Kyosho parts for TF5s are not commonly available in KWS shops.  If you don't insist on original parts from Kyosho, you can use replacement parts from various after market suppliers such as 3 Racing etc.
For example, my carbon chassis, upper deck and motor mount are from 3 Racing; rear universal drive shafts are the same ones as my Sakura Zero etc.
For items such as suspension arms, I have to use Kyosho original parts and I got them from "Hung Sing".

Also you may not be able to obtain advice easily as most c-hings are unfamiliar with this car.  You may need to explore and compare on your own for a better understanding of its maintenance.  On the other hand, Kyosho instruction manual is easy to read and comprehensive with lots of details.

This was my first EP touring car and I only play it a few times before switching over to Zero.  Shaft driven car is fun to drive and is the reason why I restore it.

作者: wiggles 時間: 2011-3-31 23:42
http://hk.3racing.hk/products_li ... 6&x=21&y=12

作者: 123 時間: 2011-3-31 23:47
請問呢部TF5s賣緊幾錢呢?thx~

作者: wiggles 時間: 2011-3-31 23:52
回復 13# 123
It was HK$1480 at Red Star (last November). All plastic parts.
http://www.kyosho.com/jpn/products/rc/detail.html?product_id=104161

作者: 123 時間: 2011-4-1 00:14

回復 123
It was HK$1480 at Red Star (last November). All plastic parts.
wiggles 發表於 2011-3-31 23:52

登錄/註冊後可看大圖

炭仟低版是自己改?

作者: LoFi 時間: 2011-4-1 00:21

炭仟低版是自己改?
123 發表於 2011-4-1 00:14

登錄/註冊後可看大圖

CHing,

好似一樓講咗係3Racing喎。

作者: 123 時間: 2011-4-1 00:29

CHing,

好似一樓講咗係3Racing喎。
LoFi 發表於 2011-4-1 00:21

登錄/註冊後可看大圖

係喎!THX~THX~

作者: wiggles 時間: 2011-4-10 15:57
Installed anti-roll bars using Top Sabre kits with some minor modifications.

Front:

登錄/註冊後可看大圖

DSC_6474.jpg (156.55 KB, 下載次數: 8)

下載附件

2011-4-10 15:55 上傳

登錄/註冊後可看大圖

DSC_6478.jpg (215.09 KB, 下載次數: 12)

下載附件

2011-4-10 15:55 上傳

Rear:

登錄/註冊後可看大圖

DSC_6475.jpg (148.36 KB, 下載次數: 8)

下載附件

2011-4-10 15:55 上傳

登錄/註冊後可看大圖

DSC_6479.jpg (216.25 KB, 下載次數: 9)

下載附件

2011-4-10 15:56 上傳

作者: wiggles 時間: 2011-4-20 21:25
Installed new steering and servo saver. Repositioned servo.

登錄/註冊後可看大圖

DSC_6491.jpg (125.71 KB, 下載次數: 11)

下載附件

2011-4-20 21:24 上傳

登錄/註冊後可看大圖

DSC_6489.jpg (133.49 KB, 下載次數: 13)

下載附件

2011-4-20 21:24 上傳

作者: alex306 時間: 2011-4-20 21:44
可以落塲啦

作者: pma 時間: 2011-4-21 11:33

wiggles 發表於 2011-3-28 14:50

登錄/註冊後可看大圖

回復 5# hkwcc00

TF5s is not a very strong car. As mentioned previously the plastic tub was brok ...

I'm owner of ZX-5 and would like transform it to be TF5. Could you share with me where I can buy the 3Racing part at KWS. How much your carbon chassis? thanks

作者: wiggles 時間: 2011-4-21 11:50
Try 11F 星野一義 to help with ordering Carbon Chassis and alloy steering

Try Hung Sing for original Kyosho A arms etc.

作者: wiggles 時間: 2011-4-21 11:55
本帖最後由 wiggles 於 2011-4-21 11:58 編輯

Hopefully Tamiya will release this 200MM body soon. I can replace the old Lexus SC430 which is badly beaten up.

SP.1450 RAYBRIG HSV-010 (wide) Spare Body Set
Release date: May 21 (Saturday) about
Price (including tax): 4,410 yen
Category: RC
ITEM No: 51450

登錄/註冊後可看大圖

作者: rk2 時間: 2011-4-21 12:26

wiggles 發表於 2011-4-20 21:25

登錄/註冊後可看大圖

Installed new steering and servo saver. Repositioned servo.

見你部 TF5 搞得好正, 我早前都收左部 TF5 SHIN VERSION, 但未得嫻搞D 電子野落去.

應該都唔太差的.

作者: wiggles 時間: 2011-4-21 12:35
TF5 Shin 正啊師兄! http://www.kyosho.com/jpn/produc ... l?product_id=102176
高幾班喎!

作者: cHRisTiAN 時間: 2011-4-21 13:03
其實TF5已內置SERVO saver功能,點解還要加裝servo saver?

作者: lingchic 時間: 2011-4-21 13:04
勁 !! 見到你部TF5s 就令我想起我高中年代玩TF2, TF3, 超懷念!! C hing 加油!!

作者: wiggles 時間: 2011-4-21 13:57
回復 cHRisTiAN 的帖子

The internal servo saver is too strong. I found that all the ball caps are loosen after a few rounds at JV. This affects the accuracy of the steering.
Hence I added a TOP servo saver which has better response to steering impacts, further tighten the internal saver so that it becomes pretty much a fixed steering column. Of course I replaced all the loose ball caps to restore its accuracy.

作者: rk2 時間: 2011-4-21 22:57

wiggles 發表於 2011-4-21 12:35

登錄/註冊後可看大圖

TF5 Shin 正啊師兄! http://www.kyosho.com/jpn/products/rc/detail.html?product_id=102176
高幾班喎!:vi ...

share my TF-5 SHIN version photo

: 登錄/註冊後可看大圖

作者: 清清 時間: 2011-4-21 23:05
皮帶TF-5前期款好跑過SHIN版！

作者: lui222k 時間: 2011-4-22 00:42
本帖最後由 lui222k 於 2011-4-22 00:43 編輯

又多一架軸車出場啦!! 正!!

作者: wiggles 時間: 2011-4-24 02:22
Just found that TF5s suspension mounts are low profile enuff for this popular 911 GT1 body (200mm).

登錄/註冊後可看大圖

DSC_6775.jpg (97.76 KB, 下載次數: 9)

下載附件

2011-4-24 02:20 上傳

登錄/註冊後可看大圖

DSC_6785.jpg (145.15 KB, 下載次數: 10)

下載附件

2011-4-24 02:20 上傳

作者: rk2 時間: 2011-4-26 11:12

wiggles 發表於 2011-4-24 02:22

登錄/註冊後可看大圖

Just found that TF5s suspension mounts are low profile enuff for this popular 911 GT1 body (200mm).
...

WOW, LOVELY

作者: joesample 時間: 2011-7-4 01:09
C-Hing, where can I buy the 3 Racing upper and lower deck for TF5s?

If you do not mind, can you share with me the current weight (in g) of your modified TF5s?

I am playing Fazer, just would like to see if TF5s is a good upgrade/replacement for Fazer (if I look for shaft-drive car)

Thanks.

作者: joesample 時間: 2011-7-4 19:38
Hi wiggles, before I got your reply, I just brought the TF5s +3Racing parts from Hung Sing, to join your TF5s club!

作者: kk107423 時間: 2011-7-5 11:34

wiggles 發表於 2011-4-24 02:22

登錄/註冊後可看大圖

Just found that TF5s suspension mounts are low profile enuff for this popular 911 GT1 body (200mm).
...

nice

作者: wiggles 時間: 2011-7-5 12:17
回復 joesample 的帖子

Fazer is a much stronger car that TF5s.

However once you have fine tuned your TF5s, you will have plenty of fun.

作者: joesample 時間: 2011-7-5 19:43
Hi Wiggles,

When you say Fazer is stronger than TF5s, do you mean the durability? Or you do mean performance wise?

I assumed, Fazer is definitely more durable than TF5s, but TF5s should be light enough to compete with other FAST car.

Is my understanding correct?

作者: takuma 時間: 2011-7-5 21:33
nice car~~

作者: cherwowo 時間: 2011-7-11 18:19
Kyosho focusing on Mini-Z these days, it seems.

作者: carvenchow 時間: 2011-7-11 18:23
原來TF5 都有分軸同皮帶...

作者: mmmmartin 時間: 2011-8-1 21:45
high performance car

作者: joesample 時間: 2011-8-2 01:14
Just joined the TF5s club, upgraded it with 3Racing parts, and installed with the latest Yeah Racing MT4 Sensor.

Thanks for Wiggle C-Hing's setup tips.

登錄/註冊後可看大圖