RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: My 6-Wheels Cyber Formula [打印本頁]

作者: kevin5578 時間: 2011-11-29 21:50
標題: My 6-Wheels Cyber Formula
本帖最後由 kevin5578 於 2012-1-25 14:49 編輯

FINISHED !!

登錄/註冊後可看大圖

作者: tiger1 時間: 2011-11-29 22:03
very nice wor.

作者: tiger1 時間: 2011-11-29 22:06
Where are those steering bellcranks from?

作者: prowing 時間: 2011-11-29 22:21
好科幻！

作者: kevin5578 時間: 2011-11-29 22:51
回復 tiger1 的帖子

That's the steering lever from hot bodies...i also got the steering post from HPI....they are used to replace the stock plastic parts, i think there will have better steering

作者: garywong5368 時間: 2011-11-29 22:57
回復 kevin5578 的帖子

師兄是自己整底板還是有現成賣?

作者: kevin5578 時間: 2011-11-29 22:59
I still have a long way to finish it.......

wanna buy..
1)KO 2.4G FHSS
2)Servo --> KO 951
3)ESC --> Tekin FX-R + 白豬 or Tekin RS + 17.5T

作者: kevin5578 時間: 2011-11-29 22:59
I still have a long way to finish it.......

wanna buy..
1)KO 2.4G FHSS
2)Servo --> KO 951
3)ESC --> Tekin FX-R + 白豬 or Tekin RS + 17.5T

作者: kevin5578 時間: 2011-11-29 22:59
I still have a long way to finish it.......

wanna buy..
1)KO 2.4G FHSS
2)Servo --> KO 951
3)ESC --> Tekin FX-R + 白豬 or Tekin RS + 17.5T

作者: kevin5578 時間: 2011-11-29 22:59
I still have a long way to finish it.......

wanna buy..
1)KO 2.4G FHSS
2)Servo --> KO 951
3)ESC --> Tekin FX-R + 白豬 or Tekin RS + 17.5T

作者: R平 時間: 2011-11-29 22:59
好有型

作者: surviver 時間: 2011-11-29 23:40
是不是凰亞....？

作者: tiger1 時間: 2011-11-30 07:09
Thanks are c-hing

作者: tiger1 時間: 2011-11-30 07:10
C-hing, may I ask how much is the 111 rear end?

作者: tiger1 時間: 2011-11-30 07:48
Wow, not cheap wor...

作者: Belldanndy 時間: 2011-11-30 10:34
師兄，想請問駛唔駛加長尾軸？

作者: tiger1 時間: 2011-11-30 10:59
I think need to add rear end width but I would not, the different is rather small in my opinion

作者: Belldanndy 時間: 2011-12-1 18:13
師兄，嗰servo你打算放响邊？

作者: kevin5578 時間: 2011-12-1 19:13
Plan緊放左邊定中間，如果中間就可能用low profile servo

作者: SONICPAULO27D 時間: 2011-12-1 19:21
師兄真捨得~~會唔會落地玩呀?

作者: Belldanndy 時間: 2011-12-2 01:03

kevin5578 發表於 2011-12-1 19:13

登錄/註冊後可看大圖

Plan緊放左邊定中間，如果中間就可能用low profile servo

如果放左邊駛唔駛鑽底板呢？

作者: Belldanndy 時間: 2011-12-2 01:22
師兄，low profile 你會邊隻呢
Savox SC-1251MG或BLS551?
Thx!!

作者: kevin5578 時間: 2011-12-2 18:58
我都唔知邊隻好，我有支KO ex-10 Helios, 其實係唔係用KO servo 好，定係其實所有digital servo 都已經可以用到super HSR架，如果係我就買隻平野啦，KO servo 好似比其他brand貴

作者: rave1010hk 時間: 2011-12-7 17:08

kevin5578 發表於 2011-12-2 18:58

登錄/註冊後可看大圖

我都唔知邊隻好，我有支KO ex-10 Helios, 其實係唔係用KO servo 好，定係其實所有digital servo 都已經可以 ...

digital servo 都通用

作者: Belldanndy 時間: 2011-12-12 16:53

tiger1 發表於 2011-11-30 07:10

登錄/註冊後可看大圖

C-hing, may I ask how much is the 111 rear end?

C-hing, where you get the damper system from (TRG5086)? Thx!!

作者: Belldanndy 時間: 2011-12-12 18:31
I already send enquiry to them, but haven't got respond yet.
May be I wait a bit longer la.

作者: kevin5578 時間: 2011-12-12 22:01
They will get back to you like in 1 day, ask them for TRG 1008 if you are planning to use TRG F103 motor mount, also there is one selling in eBay, you can try to buy there, price is cheaper in eBay, but for the TRG1008, that website is the only one you can buy from, so if you order them both and more stuffs from TRG, I would recommend the website since you will save some shipping cost

作者: kevin5578 時間: 2011-12-13 09:21
Few more pictures uploaded !!

作者: Belldanndy 時間: 2011-12-13 10:57
I have the TRG5055 motor mount, can use TRG1008 for the damper?
The TRG1008 have already sold out la.

Any idea where I can get one?
Thanks!

作者: RX-7FD 時間: 2011-12-13 12:34

kevin5578 發表於 2011-11-29 21:50

登錄/註冊後可看大圖

Finally, got it almost done...

師兄:你果set紫色轉向係咩牌子o架? kws 邊度有得賣呢? thanks!!!!!!!!!!!

作者: alxyrh 時間: 2011-12-20 16:25
正，做好只能得个摆字。。哈

作者: shinka43 時間: 2011-12-20 22:46
最衰呢架唔用得在F1RCGP

作者: redmond 時間: 2011-12-23 23:21
頭轆係咪P34的頭轆??

作者: chacha 時間: 2011-12-24 03:01
回復 redmond 的帖子

用普通 F1 頭呔

作者: tiger1 時間: 2012-1-2 10:54
kevin5578 c-hing, any progress?

作者: kevin5578 時間: 2012-1-2 20:53
回復 tiger1 的帖子

宜家搞緊s電子野,完成左就會去JV跑番𨍭

作者: tiger1 時間: 2012-1-2 20:59
show some more photos la C-hing

作者: kevin5578 時間: 2012-1-25 14:50
NEW PICTURES UP !!

作者: catcatland 時間: 2012-1-26 11:24
X 100 個讚

作者: tiger1 時間: 2012-1-26 12:47
the car looks very very sexy!!!

作者: cytnet 時間: 2012-2-1 12:54
師兄你係用邊隻F103呢

作者: Chrischu33 時間: 2012-2-1 13:17
nice

作者: hohohoho1234 時間: 2012-2-1 13:45
好靚呀

作者: plk67029165 時間: 2012-2-1 14:20
c hing!所有野用在幾多錢改?????用左邊個F103????

作者: kevin5578 時間: 2012-2-1 20:38
本帖最後由 kevin5578 於 2012-2-3 08:45 編輯

底板+殻=$1800
F103+104料(tamiya,TRF, Square)~$1800
TRG motor座+damper system~$1400
Hot bodies + HPI 轉向~$500 （可以用底板跟嘅膠件，不過我想upgrade金屬件)
Tekin RS Pro + servo =$1500
Wheel + tyre ~$500

Total around $7500

作者: plk67029165 時間: 2012-2-1 20:52
回復 kevin5578 的帖子

wa!ok貴.遲D打下工,整架雷神玩下先

作者: kevin5578 時間: 2012-2-1 21:07
其實平平地買架全新／二手F103 kit，~$3000都整到架，我個架應該都可以差唔多Full option架咧...

作者: chris6200 時間: 2012-2-2 00:27
nice

作者: 豆豆妺 時間: 2012-2-2 07:22
好靚呀

作者: kevin5578 時間: 2012-2-2 21:00
好想快D玩下架車，但係未買電同差機，想買部二手Hyperion，但係成日都慢過人，宜家部車得個睇字，行唔到好似冇乜生命

作者: kevin5578 時間: 2012-2-4 00:10
本帖最後由 kevin5578 於 2012-2-4 00:24 編輯

List of the Parts that i bought

TRG5086 TRG Roll Damper Unit
TRG5095 TRG Hybrid Motor Mount for F103
TRG1008 カーボンモーターマウントフロントプレート（TRG109用）
Tamiya OP.1158 F104 Aluminium Diff Housing Set
Tamiya OP.1162 F104 Carbon Rear Shaft
Tamiya OP.1332 F104 Rear Shaft Counterweight
Tamiya OP.1215 F104 Spur Gear Adapter
Tamiya OP.901 TRF Special Damper (F103GT)
Tamiya OP.601 Low Friction Adjuster (5mm x2)
Tamiya OP.598 Fluorine Coated 5mm Alum Ball Connector
Tamiya 9804154 5mm Ball Connector for F104 Steering
Tamiya No.273 Formula Car Rear Suspension Ball Mount Set
Tamiya 51243 F103GT F103RM Gear Case Set
Tamiya 50505 F103 T-Bar
Tamiya 54153 F103 Carbon Reinforced Suspension Arms X2
Tamiya 54154 F103 Carbon Reinforced Front Upright X2
Tamiya SP-509 F103 Sprint Set
Tamiya 473.1000 Hi-Torque Servo Saver
Hot bodies HB67728 HB ALUMINUM STEERING ARM (One-Piece Type)
HPI 75112 Steering Post 4 x 33.5mm
Square #SFC-117 Titanium coated Kingpin X2
3 racing Titanium turnbuckle 42mm X3
3 racing Titanium turnbuckle 35mm X1

- Wheel/Tyre -
TRG2105 Slick Tyre Wheel for F103 (F) X2
TRG2203 Slick Tyre Wheel for F103 (R)
Shimizu Racing PS-0543 Front Racing Slick Tire (Medium) x2
Shimizu Racing PS-0545 Rear Racing Slick Tire (R1)

- Screw/Screw Nut/Bearing -
Buy any brand screw, screw nut and bearings upon your needs !!
(1 bought titanium screws, aluminum screw nut and TRF fluorine coated bearing)
- Spur/Gear -
Buy upon your needs !!
(I bought kawada gear/spur, 64P 93/25)

作者: tiger1 時間: 2012-2-8 11:18
老實，咁靚真係唔玩得

作者: kevin5578 時間: 2012-2-8 21:05
唔玩又好似唔知點咁，小心D玩囉，最驚爛TRG1009，之前又Ching想買，但係好似話連TRG都discontinue左，我都應該比佢早一個月到經日本Shop向TRG訂，唔通係最後一條？

作者: Belldanndy 時間: 2012-2-9 10:53

kevin5578 發表於 2012-2-8 21:05

登錄/註冊後可看大圖

唔玩又好似唔知點咁，小心D玩囉，最驚爛TRG1009，之前又Ching想買，但係好似話連TRG都discontinue左，我都應 ...

師兄，你係咪話TRG1008？我都買咗，但好似唔再出，現只得貨尾！

作者: TheWolf 時間: 2012-2-9 13:34
How's the performance ar? Do you think an upgrade or downgrade converting a F103/4 to it?

作者: Belldanndy 時間: 2012-2-9 16:12

TheWolf 發表於 2012-2-9 13:34

登錄/註冊後可看大圖

How's the performance ar? Do you think an upgrade or downgrade converting a F103/4 to it?

Only F103 can convert with the special floor plate.

作者: kevin5578 時間: 2012-2-9 20:07
回復 TheWolf 的帖子

Performance would be more or less the same, since there are 6 wheels
, so overall weight is higher than normal f103, if you can find your way to
Minimizing the weight, would be on par with any f103

作者: TheWolf 時間: 2012-2-9 22:40
Ic thanks for your info

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)