RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 自製貼紙問題 [打印本頁]

作者: DieselEngine 時間: 2006-2-27 21:39
標題: 自製貼紙問題
想問下,如果我開電腦用word打字例如:Engine,

我想印番出黎做貼紙,貼係車殼道有冇問題呢?
最好有透明既貼紙印,好似買車款附送果d咁,有冇得買?
(買車殼送果D貼紙因為表面係膠,d墨印左落去實甩)

同埋印左出黎會唔會甩墨?我用係EPSON C40ux噴墨打印機.

作者: Scania 時間: 2006-2-28 06:43
如果唔計撞的話，唔濕水就唔會甩

作者: monkichi0210 時間: 2006-2-28 10:38
hi bros,

the sticker paper may found in the computer product supply shop....maybe cost few dollars for one A4 size...

but as i know.....the paper is for lazer printer to get a better quality.......for the jet printer.....i'm not
sure how good the end product is.....

for the water proof issue.....many guys will put one more piece of transparent sticker on the top of the image to protect it....as the guys said it won't be too thick la!!!hope can helped!!

作者: rc2006 時間: 2006-2-28 10:50
Please note that if you use inkjet to print decal, unless the ink are of very high quality, (photo-link? ), the printed decal will be de-coloured after some time due to direct exploure to sun-light.

作者: mark999hk 時間: 2006-2-28 10:54

原帖由 DieselEngine 於 2006-2-27 09:39 PM 發表
想問下,如果我開電腦用word打字例如:Engine,

我想印番出黎做貼紙,貼係車殼道有冇問題呢?
最好有透明既貼紙印,好似買車款附送果d咁,有冇得買?
(買車殼送果D貼紙因為表面係膠,d墨印左落去實甩)

同埋印左出黎 ...

我只知到如果要印防水 STICKER 的話，一定要出 ARTWORK，跟住要找 Printer 佬造絲印。咁就可以造透明底嘅貼紙。

作者: ravaglia 時間: 2006-2-28 11:45
其實如果你有一部 Thermal transfer printer 就可以 print 防水 STICKER, 不過呢d printer 好難搵.

作者: pantherjovi 時間: 2006-2-28 11:55
最簡單防水方法....用透明膠紙(最薄果種)再貼係面, me too
至於print紙用電腦商場都o.k,如果用到熱升華printer當然就最good la

作者: DieselEngine 時間: 2006-2-28 20:19
姐係我個噴墨打印機整唔到la

作者: pantherjovi 時間: 2006-3-1 17:41

原帖由 DieselEngine 於 2006-2-28 20:19 發表
姐係我個噴墨打印機整唔到la

揾返可以用噴墨機的膠貼(透明我吾建意你用,由其ink-jet),print好咪貼透明膠紙防水law,ink-jet 印到嘅,無咁靚咁解!咪買一盒返去試下law

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://rc-evo.com/xbbs/)