RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: F350 and Hilux 改慢爬及升高車身套件 [打印本頁]

作者: edison 時間: 2007-11-16 08:14
標題: F350 and Hilux 改慢爬及升高車身套件
The conversion kit will come soon before this X'max!
Servo mount!

[ 本帖最後由 edison 於 2007-12-3 00:54 編輯 ]

作者: edison 時間: 2007-11-16 08:16
Axial mount

作者: kaho0338 時間: 2007-11-18 18:44
CNC ? It looks cool .....

作者: edison 時間: 2007-11-18 19:30
Yes CNC kit !!!!!

作者: edison 時間: 2007-12-3 00:52
Font Axial:

登錄/註冊後可看大圖

Real Axial:

登錄/註冊後可看大圖

[ 本帖最後由 edison 於 2007-12-7 23:48 編輯 ]

作者: edison 時間: 2007-12-3 00:57
the CNC first sample is come back!!!!

登錄/註冊後可看大圖

[ 本帖最後由 edison 於 2007-12-7 23:47 編輯 ]

作者: edison 時間: 2007-12-3 00:58
Chassis extender

登錄/註冊後可看大圖

Crawler Chassis finished.

登錄/註冊後可看大圖

Front Axial view.

登錄/註冊後可看大圖

Real Axial view.

登錄/註冊後可看大圖

Bottom view.

登錄/註冊後可看大圖

Climb up to 5inch.

登錄/註冊後可看大圖

3 inch hight

登錄/註冊後可看大圖

Hilux rock crawling preview.

登錄/註冊後可看大圖

Compare with origin F350.

登錄/註冊後可看大圖

作者: go2usie 時間: 2007-12-3 10:11
標題: 回復 8# 的帖子
Also, have u measured the space left abve the steering servo? My measurement showed that the space is very limited and the servo will definitely hit something above in rough terrain........

~i agree with that.~

作者: aquazone 時間: 2007-12-3 11:17
標題: 回復 1# 的帖子
HI CHING i want to ask hilux改慢爬及升高車身套件 how to order??

作者: edison 時間: 2007-12-3 14:53

原帖由 sn-10 於 2007-12-3 10:03 發表

 登錄/註冊後可看大圖

I'm not an expert but would like to point out one thing. In a real 4-link system the upper and lower links should be as parallel to each other as possible, otherwise the axle will rotate in articulati ...

Thanks for your professional suggestion.
Your concern is right, I was spent meny time to slove this problem.
because my design key point is No Cut, No drill, plug and play.
Right now the Caster shifting is between -4 to -8 deg in the axle articulation.
So, this the best setup for crawling. And also I had tested the car in wild.
The climbing capability is very very good! will post the video soon.

作者: edison 時間: 2007-12-3 14:54

原帖由 go2usie 於 2007-12-3 10:11 發表

 登錄/註冊後可看大圖

Also, have u measured the space left abve the steering servo? My measurement showed that the space is very limited and the servo will definitely hit something above in rough terrain........

~i ag ...

This kit already slove this problem!

作者: Mobility(雲) 時間: 2007-12-3 14:58

原帖由 edison 於 2007-12-3 02:54 PM 發表

 登錄/註冊後可看大圖

This kit already slove this problem!

how much for this kit? around~~

作者: edison 時間: 2007-12-3 15:08

原帖由 sn-10 於 2007-12-3 15:02 發表

 登錄/註冊後可看大圖

how about the 萬向? can it rotate smoothly at that angle?

Yes!

作者: edison 時間: 2007-12-3 15:10

原帖由 Mobility(雲) 於 2007-12-3 14:58 發表

 登錄/註冊後可看大圖

how much for this kit? around~~

I still being calculation.

作者: Mobility(雲) 時間: 2007-12-5 11:55

原帖由 edison 於 2007-12-3 03:10 PM 發表

 登錄/註冊後可看大圖

I still being calculation.

no rush.......thanks

作者: edison 時間: 2007-12-12 02:02
Full set photo:

登錄/註冊後可看大圖

Here is the part list for the kit.
1. Axial mount L x2
2. Axial mount R x2
3 .Holder x2
4. Servo plate mount L x2
5. Servo plate mount R x2
6. Servo plate x2
7. Side plate L x1
8. Side plate R x1
9. Steering rod x1
10. Servo rod x1
11. Front rod x4
12. Rear rod x4
13. Ball join x10
14. full set screw

[ 本帖最後由 edison 於 2007-12-16 22:21 編輯 ]

作者: kaho0338 時間: 2007-12-12 02:09
好正...... 攪到我想入hilux...

可唔可以做d 3mm ball 頭, 長機米, 鋁通個d 呀? 可以就留d比我, 我可以比ax10用

我相信大把人要;

[ 本帖最後由 kaho0338 於 2007-12-12 02:12 編輯 ]

作者: lai 時間: 2007-12-12 02:12

原帖由 edison 於 2007-12-12 02:02 AM 發表

 登錄/註冊後可看大圖

Full set photo:

登錄/註冊後可看大圖

Here is the part list for the kit.
1. Axial mount L x2
2. Axial mount R x2
3 .Holder x2
4. Servo plate mount L x2 ...

我想請問一不咁樣改要幾錢
我今日買左架hilux連啤呤
另外我見你地話2.2 wheel 係d乜 thx

作者: lai 時間: 2007-12-12 02:14

原帖由 kaho0338 於 2007-12-12 02:09 AM 發表

 登錄/註冊後可看大圖

好正...... 攪到我想入hilux...

可唔可以做d 3mm ball 頭, 長機米, 鋁通個d 呀? 可以就留d比我, 我可以比ax10用
我相信大把人要;

快d買hilux啦

作者: kaho0338 時間: 2007-12-12 02:19

原帖由 lai 於 2007-12-12 02:12 發表

 登錄/註冊後可看大圖

我想請問一不咁樣改要幾錢
我今日買左架hilux連啤呤
另外我見你地話2.2 wheel 係d乜 thx

2.2 係一個size, 通常1:10用 ...可以睇睇
http://www.junfac.com/shop/index ... amp;products_id=127

[ 本帖最後由 kaho0338 於 2007-12-12 02:21 編輯 ]

作者: lai 時間: 2007-12-12 02:35

原帖由 kaho0338 於 2007-12-12 02:19 AM 發表

 登錄/註冊後可看大圖

2.2 係一個size, 通常1:10用 ...可以睇睇
http://www.junfac.com/shop/index ... amp;products_id=127

嘩正呀咁呢套2.2我可以係邊買到
唔該晒

作者: kaho0338 時間: 2007-12-12 02:36

原帖由 lai 於 2007-12-12 02:35 發表

 登錄/註冊後可看大圖

嘩正呀咁呢套2.2我可以係邊買到
唔該晒

上網訂...就係上面個網
用信用卡palpay 過數

作者: lai 時間: 2007-12-12 02:38

原帖由 kaho0338 於 2007-12-12 02:36 AM 發表

 登錄/註冊後可看大圖

上網訂...就係上面個網
用信用卡palpay 過數

okok唔該晒咁車呔呢?
唔好意思煩住你

作者: kaho0338 時間: 2007-12-12 02:43

原帖由 lai 於 2007-12-12 02:38 發表

 登錄/註冊後可看大圖

okok唔該晒咁車呔呢?
唔好意思煩住你

普通2.2軚, 去廣華街應該有, 冇又要上網訂
http://www.ckrccrawlers.com/shop ... amp;products_id=327
http://www.ckrccrawlers.com/shop ... amp;products_id=290

上網訂你預$800 一set(軚軨), 連所有運費

作者: lai 時間: 2007-12-12 02:46

原帖由 kaho0338 於 2007-12-12 02:43 AM 發表

 登錄/註冊後可看大圖

普通2.2軚, 去廣華街應該有, 冇又要上網訂
http://www.ckrccrawlers.com/shop ... amp;products_id=327
http://www.ckrccrawlers.com/shop ... e=product_info& ...

明白晒真係唔該晒
我頭先見到ax10我有d想買但係架hilux吸引d

[ 本帖最後由 lai 於 2007-12-12 02:49 編輯 ]

作者: edison 時間: 2007-12-12 09:22

原帖由 lai 於 2007-12-12 02:12 發表

 登錄/註冊後可看大圖

我想請問一不咁樣改要幾錢
我今日買左架hilux連啤呤
另外我見你地話2.2 wheel 係d乜 thx

價錢我還在頭痛中, 因為只是自家設計,做貨數量太小.
令到價錢現在還很貴, 現在還等新廠報價.

作者: edison 時間: 2007-12-12 09:23

原帖由 kaho0338 於 2007-12-12 02:09 發表

 登錄/註冊後可看大圖

好正...... 攪到我想入hilux...

可唔可以做d 3mm ball 頭, 長機米, 鋁通個d 呀? 可以就留d比我, 我可以比ax10用
我相信大把人要;

The qty too small is very diff to ask factory to make, maybe I have you to build!

作者: edison 時間: 2007-12-12 09:25

原帖由 lai 於 2007-12-12 02:38 發表

 登錄/註冊後可看大圖

okok唔該晒咁車呔呢?
唔好意思煩住你

I saw Hang sing have this tire wor, this is also go for crawling!
http://www.ckrccrawlers.com/shop ... amp;products_id=327

作者: pantherjovi 時間: 2007-12-12 09:52

原帖由 lai 於 2007-12-12 02:35 發表

 登錄/註冊後可看大圖

嘩正呀咁呢套2.2我可以係邊買到
唔該晒

2.2铃我係"四肢健全"見到,但個樣就....
呔要去"鴻星"look look 有mabo 2.2賣,如果佢有就代理都有,代理平幾草
Moab 2.2 P/N#1120-00 Tel: 2893-4303 (用part no:問)

作者: lai 時間: 2007-12-12 12:07

原帖由 edison 於 2007-12-12 09:22 AM 發表

 登錄/註冊後可看大圖

價錢我還在頭痛中, 因為只是自家設計,做貨數量太小.
令到價錢現在還很貴, 現在還等新廠報價.

咁有最新消息就公佈啦唔該

作者: lai 時間: 2007-12-12 12:09

原帖由 pantherjovi 於 2007-12-12 09:52 AM 發表

 登錄/註冊後可看大圖

2.2铃我係"四肢健全"見到,但個樣就....
呔要去"鴻星"look look 有mabo 2.2賣,如果佢有就代理都有,代理平幾草
Moab 2.2 P/N#1120-00 Tel: 2893-4303 (用part no:問)

唔該晒我得閑出去睇下先

作者: edison 時間: 2007-12-12 18:58
This is the final seting, and will using this revision to production

登錄/註冊後可看大圖

Test run:

登錄/註冊後可看大圖

作者: edison 時間: 2007-12-12 21:11
Test run video here:

http://www.youtube.com/watch?v=5MSwLz5Z83o

作者: go2usie 時間: 2007-12-12 21:37
it s nice~ edison, please reserved one set with discount~ pre-book~

作者: kaho0338 時間: 2007-12-12 23:22
where is this place ? it looks really nice.... !

this is not f350/hilux anymore, this is super rock crawler f350/hilux !

[ 本帖最後由 kaho0338 於 2007-12-12 23:24 編輯 ]

作者: edison 時間: 2007-12-14 10:05

原帖由 go2usie 於 2007-12-12 21:37 發表

 登錄/註冊後可看大圖

it s nice~ edison, please reserved one set with discount~ pre-book~

Ok, Thanks for your support!

作者: mikewu 時間: 2007-12-14 10:10
edison, I would be VERY Interested on getting a set from you. Please let me know if you have any updates in terms of price and delievery time. Million thanks!

作者: edison 時間: 2007-12-15 00:07

原帖由 mikewu 於 2007-12-14 10:10 發表

 登錄/註冊後可看大圖

edison, I would be VERY Interested on getting a set from you. Please let me know if you have any updates in terms of price and delievery time. Million thanks!

I hope can get the price before next Monday!

作者: edison 時間: 2007-12-16 22:11
I got the final price la!
HKD 550/set
I need to get total 30 sets for start production.

http://bbs.rc-evo.com/viewthread ... p;page=1&extra=

[ 本帖最後由 edison 於 2007-12-16 22:47 編輯 ]

作者: edison 時間: 2007-12-20 14:32
有冇多D C hing 有興趣呀?
唔夠30套開唔到波呀!

作者: edison 時間: 2007-12-26 01:48
Servo mount update outlook!

登錄/註冊後可看大圖

[ 本帖最後由 edison 於 2007-12-26 09:56 編輯 ]

作者: stig 時間: 2007-12-26 13:26
its a very very nice conversion kit, with a reasonable price !!
i must buy one if i have a hilux.........
great job...=]

作者: stig 時間: 2007-12-26 13:27
may i ask did u use the pro engineer software to draw it ?

作者: edison 時間: 2007-12-26 16:31