M1B準備變身...

原來可以唔駛一定用兩排7.4.....可用11.1V......
所以可以諗下繼續.....

拆晒ENGINE油缸......準備變身~

E KIT返O左.......不過K FACTORY張說明書真係搵鬼睇得明....完全冇講點裝,最後自己靠常識搞掂......
但係個SERVO冇KIT可以扭實佢.....濕滯.....

totally agreed, cause if you get the good stuffs at the beginning, no need to get a better one when you feel like what you got ain't good enough...
MORE THAN ENOUGH
is better than
NOT ENOUGH!!!

多謝23樓CHING支持, 因為小弟之前就是做過你所講, 白白浪費了好多......野

manfail1122 發表於 2012-8-9 01:27

                               
登錄/註冊後可看大圖

你玩1/8 OFFROAD, 就是燒錢,而介紹比你已經係又平又快,轉換性又高. 不用你白白浪費錢. 貪平買4CELLS ESC之 ...

totally agreed, cause if you get the good stuffs at the beginning, no need to get a better one when you feel like what you got ain't good enough...
MORE THAN ENOUGH
is better than
NOT ENOUGH!!!

你玩1/8 OFFROAD, 就是燒錢,而介紹比你已經係又平又快,轉換性又高. 不用你白白浪費錢. 貪平買4CELLS ESC之後, 唔夠玩又去買6CELLS 野. 1/8 OFFROAD係 4CELLS 起標, 你又 用3CELLS, 保證你 用錢更多

manfail1122 發表於 2012-8-8 21:57

                               
登錄/註冊後可看大圖

更係用4 CELLS , 狂野D就6 CELLS. ESC 用支援6CELLS 加2000KV 4274.

唔駛錢咩!

原來可以唔駛一定用兩排7.4.....可用11.1V......

更係用4 CELLS , 狂野D就6 CELLS. ESC 用支援6CELLS 加2000KV 4274.

AMAT 發表於 2012-8-7 13:48

                               
登錄/註冊後可看大圖

http://www.kfactoryracing.com/production.jsp?id=K8250&pageNum=1

呢一份.

The M8 conversion kit looks very good, but looks like the motor are plastic....
btw, how much that cost, and I found out that the turbo version came with more good stuff, am i right?

DK666 發表於 2012-8-7 13:24

                               
登錄/註冊後可看大圖

M8 E KIT, what's that looks like? And just wondering if Jet still got the $1xxx M1B (DEAD PRODUCT) ...

http://www.kfactoryracing.com/pr ... K8250&pageNum=1

呢一份.

M1B其實已經係OLD MODEL,
我呢架係M1B TURBO,已經係新過M1B.

不過,冇話唔玩得O既,都係咁玩.
至於PARTS就仲有得訂O既,但要小心留意係FOR M1B定M1B TURBO,因為冇分別,尤其係O的懸掛臂長度.

AMAT 發表於 2012-8-7 13:16

                               
登錄/註冊後可看大圖

我已經搵代理ORDER O左M8果套E KIT,可以用係M1B到.

M8 E KIT, what's that looks like? And just wondering if Jet still got the $1xxx M1B (DEAD PRODUCT)???

DK666 發表於 2012-8-7 12:49

                               
登錄/註冊後可看大圖

Just for you, AMAT
http://www.wolfhobbies.com/Wolf_Hobbies_Parts-Buggy_Brushless_Conversion_Kit.html ...

我已經搵代理ORDER O左M8果套E KIT,可以用係M1B到.

DK666 發表於 2012-8-7 12:38

                               
登錄/註冊後可看大圖

Really, then if the M1B price is right....then I might just get one!

M1B唔出喇........宜家佢係變成M8或E8.......

Just for you, AMAT
http://www.wolfhobbies.com/Wolf_ ... Conversion_Kit.html

AMAT 發表於 2012-8-7 12:33

                               
登錄/註冊後可看大圖

香港有新O既TEAM MAGIC代理.
金水模型都會入TEAM MAGIC零件.

Really, then if the M1B price is right....then I might just get one!

DK666 發表於 2012-8-7 11:35

                               
登錄/註冊後可看大圖

But Jet Orders are PAIN IN THE ASS......

香港有新O既TEAM MAGIC代理.
金水模型都會入TEAM MAGIC零件.

如果你想訂PARTS可以係TEAM MAGIC區到詢問

vcslll 發表於 2012-8-7 11:14

                               
登錄/註冊後可看大圖

師兄如用11.1V 要用幾多kv麼打?Thanks.

未諗,一步步嚟......

AMAT 發表於 2012-8-7 10:37

                               
登錄/註冊後可看大圖

我仲有一堆PARTS,所以唔駛驚住.

香港買PARTS係麻煩,多數要訂,所以最好訂定.

But Jet Orders are PAIN IN THE ASS......

師兄如用11.1V 要用幾多kv麼打?Thanks.

支持TM M1B

DK666 發表於 2012-8-7 10:23

                               
登錄/註冊後可看大圖

呀師兄,Team Magic係快X...$1980嗰時我都好想買但一講到parts就....

我仲有一堆PARTS,所以唔駛驚住.

香港買PARTS係麻煩,多數要訂,所以最好訂定.