新手打個招呼先

CR01 要用到mamba max?
sidewinder 都夠照啦

原帖由 黎小雞 於 2009-1-7 08:00 發表

                               
登錄/註冊後可看大圖

師兄ax10用sidewinder夠照嗎?我現正為電器麻腦,不過好似唔多見有得買?thx

mamba max is cool  if budget is not a concern, of coz u should get it, it can handle higher power input and output, like 7700kv, but you dont need that for crawler
the sidewinder is smaller, less power and of coz cheaper, but it is very capable in use of rock crawling, it can handle 3-cells too, no problem for torque on brushless motor
Brother Edison is using Sidewinder with very good performance, smooth and high torque on rocks

I'm using Novak crawler esc but I have seen lots of ppl using sidewinder and mamba max and they are both very good

better check out here
http://www.castlecreations.com/products/mamba_max.html
http://www.castlecreations.com/products/sidewinder.html

hope it helps

[ 本帖最後由 sunfffd 於 2009-1-7 10:46 編輯 ]

原帖由 黎小雞 於 2009-1-8 04:24 發表

                               
登錄/註冊後可看大圖

多謝指教,我對mamba max好有興趣,想多問師兄個網頁所介紹的係咪得一種無刷電變,我玩慢爬應用那個kv既motor,kv數值大小點分?thx

seems both of them can handle brushed and brushless motor, but brushless is much better la
I think most C hing here use brushless motor between 850 to 1500 kv
the higher the "kv" value is, the higher the rpm per voltage supplied