今日郁手架F201小小問題

1.)前面servo推轉向支推杆頂到個波箱,你地會唔會,有乜解決辦法?
2.)買左3racing Alum motor mount唔岩用,我換左快齒,你地會唔會??
3.)原裝中軸好鬼重,所以我換了3racing,但安裝有難度,你地有無發生??

原帖由 Mobility 於 2006-6-4 23:38 發表


Front arm 下,

強化個隻~~

原帖由 gary 於 2006-6-4 11:32 PM 發表
clear stabilzer??乜黎架??

Front arm 下,

clear stabilzer??乜黎架??

原帖由 gary 於 2006-6-4 11:20 PM 發表
咁裝柱香先..ha..ha...
個用黑豬個感覺幾快咁,試左車未??

test drive already

Acc too slow, but top speed is alright, with 4200 battery can play long

one expert told me to take out the clear stabilzer in the front can have better turn, but i didn't

原帖由 Mobility 於 2006-6-4 23:19 發表


ok....as soon as possible

fast..

原帖由 Mobility 於 2006-6-4 23:16 發表



God Bless YOU.

咁裝柱香先..ha..ha...
個用黑豬個感覺幾快咁,試左車未??

原帖由 gary 於 2006-6-4 11:14 PM 發表

我都係用 Black Pig,post張相黎睇睇...

ok....as soon as possible

原帖由 gary 於 2006-6-4 11:12 PM 發表

人地都無話要,多事,我宜家用番個膠mount mount,個3racing試左好多次都唔得....

God Bless YOU.

原帖由 Mobility 於 2006-6-4 23:06 發表


i throw the 23 motor gear, use 24...........very tight, i like tight.......

Remind.......better use screw gel with the Alu motor mount

my car finished....rctpp asked to use BLACK SKIN PIG ...

我都係用 Black Pig,post張相黎睇睇...

原帖由 Mobility 於 2006-6-4 23:08 發表



Gary, sell tham to him la

you can buy all Tamiya F201 Hop up at WaiXX, including the mount and 中軸

人地都無話要,多事,我宜家用番個膠mount mount,個3racing試左好多次都唔得....

原帖由 gary 於 2006-6-4 11:02 PM 發表

你想要3racing alum mount mount同中軸??

Gary, sell tham to him la

you can buy all Tamiya F201 Hop up at WaiXX, including the mount and 中軸

原帖由 gary 於 2006-6-4 11:00 PM 發表

明天先啦,但3 racing摩打mount成個樣同tamiya一樣,但可以摩打齒點唔到大減齒??
你架又攪成點呀??

i throw the 23 motor gear, use 24...........very tight, i like tight.......

Remind.......better use screw gel with the Alu motor mount

my car finished....rctpp asked to use BLACK SKIN PIG, so i used the orginal motor

原帖由 markpo 於 2006-6-4 23:01 發表
我問緊 gary lor~
但我都係用反牙wor~ 都無呢個問題出黎~

你想要3racing alum mount mount同中軸??

我問緊 gary lor~
但我都係用反牙wor~ 都無呢個問題出黎~

原帖由 Mobility 於 2006-6-4 22:58 發表



any photos?

2.)即係要買原裝hop up啦.(YOU SHOULD BE...............HAHA......another $60??)

明天先啦,但3 racing摩打mount成個樣同tamiya一樣,但可以摩打齒點唔到大減齒??
你架又攪成點呀??

原帖由 gary 於 2006-6-4 10:54 PM 發表
1.)但轉向時個波箱會郁
2.)即係要買原裝hop up啦.
3.)是要好用力推佢入去,找番出黎都一樣~~

any photos?

2.)即係要買原裝hop up啦.(YOU SHOULD BE...............HAHA......another $60??)

原帖由 orange00 於 2006-6-4 22:53 發表


1)我估你用咗反牙.
2)我用星星, 無問題
3)擺好支軸先拍隻杯入去.

1.)原裝無反牙
3.)你有無用緊??

1.)但轉向時個波箱會郁
2.)即係要買原裝hop up啦.
3.)是要好用力推佢入去,找番出黎都一樣~~

原帖由 gary 於 2006-6-4 22:27 發表
1.)前面servo推轉向支推杆頂到個波箱,你地會唔會,有乜解決辦法?
2.)買左3racing Alum motor mount唔岩用,我換左快齒,你地會唔會??
3.)原裝中軸好鬼重,所以我換了3racing,但安裝有難度,你地有無發生??

1)我估你用咗反牙.
2)我用星星, 無問題
3)擺好支軸先拍隻杯入去.