any news of Losi Comp?

fly175hk · 發表於 2009-6-5 21:02:57

本帖最後由 fly175hk 於 2009-6-5 21:14 編輯

Just arrived yesterday

fly175hk · 發表於 2009-6-7 00:36:18

本帖最後由 fly175hk 於 2009-6-7 00:42 編輯

10# rockdragon

Thx so much for your advice. Are those Tamiya Grease good enough? Can you elaborate a bit on "how to heat sink tube at all CVD pin"?
I still have no time to put those electronics in yet

fly175hk · 發表於 2009-6-7 00:40:38

11# simontam

我見到佢寫明唔用Dig 就: "If you will not be using the optional DIG system,remove the small tie rod attached to the shift horn" 其實都係好簡單 .

fly175hk · 發表於 2009-6-7 08:48:52

15# 馬田

重有, 全車8成以上用英制鏍絲,好唔方便. 我要買過晒D架生. 另外架車唔跟摩打齒...

fly175hk · 發表於 2009-6-7 08:49:57

14# rockdragon

Wow!! Really great tips!! Thank you.

fly175hk · 發表於 2009-6-7 22:57:03

18# simontam

重未知. 架車我未有時間同工具去拆. 不過CVD個道落鏍絲膠+heat shrink 應該安全掛

fly175hk · 發表於 2009-6-13 01:03:50

20# simontam

我架冇囉C批跟.. 佢D金屬servo arm 冇配比 Futaba用嘅...而我係用9157..

C hing 打算用乜野 Motor 同幾多齒呀?

fly175hk · 發表於 2009-6-14 18:22:44

Seems like LCC is geared for faster motor (eg.35T) and 3S Lipo..

		自動登錄	找回密碼
密碼			新玩家註冊