RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 7443|回復: 22
打印 上一主題 下一主題
收起左側

新玩具

[複製鏈接]
跳轉到指定樓層
1#
ice1234 發表於 2006-11-14 22:51:52 | 顯示全部樓層 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
80% 完成

[ 本帖最後由 ice1234 於 2006-11-14 22:53 編輯 ]
2#
 樓主| ice1234 發表於 2006-11-21 22:08:08 | 顯示全部樓層
use servo to push the switch, so when one motor move , other one remain stop............tank will turn to the direction that u want..
3#
 樓主| ice1234 發表於 2006-11-26 15:34:53 | 顯示全部樓層
原帖由 tiger1 於 2006-11-26 02:27 PM 發表
That is a Nichimo 1/35 Tiger 1. It uses two RE140 motors. Not good. The gears are very soft, easily stripped.....

it's type 130......not RE140 motor................
4#
 樓主| ice1234 發表於 2006-11-26 15:35:21 | 顯示全部樓層
5#
 樓主| ice1234 發表於 2006-11-27 21:38:42 | 顯示全部樓層
原帖由 Ang 於 2006-11-26 11:58 PM 發表
ice1234:

Very innovative mod   I'm surprised that you can fit so many stuff into a 1/35 platform.

I wish I could install the left/right switch mechanism into my motorized plastic model tank ...

photo

o個兩個只不過係普通撞掣.....鴨記有得賣....
用其中兩個接點......com 同 nc......
當其中一個掣比servo撞到,該撞掣會變no....即係open circuit......o個邊個motor就會停低唔轉.....

[ 本帖最後由 ice1234 於 2006-11-27 22:00 編輯 ]
6#
 樓主| ice1234 發表於 2006-11-27 21:51:56 | 顯示全部樓層
原帖由 Ang 於 2006-11-26 11:58 PM 發表
ice1234:

Very innovative mod   I'm surprised that you can fit so many stuff into a 1/35 platform.

I wish I could install the left/right switch mechanism into my motorized plastic model tank ...

servo --- esky....you can use any servo in same size
The battery are not put inside turret , it just under the receiver

[ 本帖最後由 ice1234 於 2006-11-27 21:53 編輯 ]
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-8 10:35 , Processed in 0.165796 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表