(6月17日更新) 3racing XI Sport 開盒,首次發報開始組裝

3racing XI Sport 開盒,首次發報開始組裝 PART1
3racing XI Sport 開盒,首次發報開始組裝 PART2

登錄/註冊後可看大圖

請問xi sport 的c hub   rear hub 及轉向杯是否合zero用

Salviour94 發表於 2013-12-17 11:23
680 打交差

Thanks, 如果平到五佰幾就好,買架聖誕節玩下

tc3driver 發表於 2013-12-15 22:51
由於太耐無去kws, 所以吾知食粥咩價, RC Mark的價不可作準, thank u anyway

680 打交差

由於太耐無去kws, 所以吾知食粥咩價, RC Mark的價不可作準, thank u anyway

tc3driver 發表於 2013-12-15 20:08
請問xi sport現在幾錢?

RC媽 HK$772 左右，食粥門口有放出嚟，可以去問下咩價錢......

請問xi sport現在幾錢?

師兄呢架車有冇人玩?
第一次買車的新手識唔識砌?

thl0610 發表於 2013-11-28 17:49
唔好意思,,, 我想問下 XI SPORT 車殼應該用190MM 定係 200MM??  新手唔識睇 麻煩解答 ...

係190mm....

唔好意思,,, 我想問下 XI SPORT 車殼應該用190MM 定係 200MM??  新手唔識睇 麻煩解答

正,一部比一部好,重用埋搞牙油壓,但點解好似唔及ZERO S咁多人討論,部車依家賣緊幾錢?等我都入返部玩玩

请问下，你有卖Sakura Ultimate 的车架码

PYC Kyosho CUP 30-06-2013 XI Sport 設定資料

3racingjacky 發表於 2013-7-1 19:36

                               
登錄/註冊後可看大圖

Pls contact [email protected] for the spare parts supply services

Ok, try la!

https://www.facebook.com/media/s ... 96510613&type=1
很高興在這裡能跟大家分享我們喜悅,30/06/2013在PYC賽場舉辦的京商盃,我們的隊友杰仔在13.5及10.5的比賽項目中分別使用XI SPORT及SAKURA ULTIMATE的車架獲得了該2項的冠軍,詳情可連結到以上3racing的面書專頁給我們打打氣吧!
設定資料會整理後馬上給大家分享!!
多謝大家一直以來的支持及鼓勵 !!

vin00002002 發表於 2013-7-1 14:58
Have test the xi sport today with 6.5t no turbo. Tried around 10laps in JV, have little crash right  ...

Pls contact [email protected] for the spare parts supply services

Have test the xi sport today with 6.5t no turbo. Tried around 10laps in JV, have little crash right at the front to the sushi not full speed n braked. The neck of the bottom n 2nd floor board all broken, think is too weak that part. (May be coz of the separate arm pin seat.)
& no parts to buy in kws, can u help Jacky?
After that I stick to play with my 411TE....

3racingjacky 發表於 2013-6-28 12:57

                               
登錄/註冊後可看大圖

vin, Thanks purchase the new XI sport !! the belts is hit a bit of the 19T pulley, please try to r ...

Noted with tkx, will test it first n wait for ur part la!

vin00002002 發表於 2013-6-27 04:13

                               
登錄/註冊後可看大圖

I brought xi and start to fix today, but the gear box not smooth, the front n back belt is stick wit ...

vin, Thanks purchase the new XI sport !! the belts is hit a bit of the 19T pulley, please try to run it as well when the sound is gone, the next production we will improve it n try to contact you for free improvement replace parts !

I brought xi and start to fix today, but the gear box not smooth, the front n back belt is stick with the side of the 19T 大減，it make click click sound when rotating, pls help. Tkx!

正講解詳細