Buggy配摩打ー問?????

965 · 發表於 2014-3-23 11:34:47

If 2 pole...ok gei.. (2s)

965 · 發表於 2014-4-4 03:34:06

If u can use 3s, then go lower kv to get more punch, 60A is decent if the rating is accurate...

For SCT , most people may suggest 100a and up esc, but if you run a lower kv motor with 3s, you will be fine.

Say hobbywing 60a ezrun, + a 2800kv motor with 3s will be good and cheap.

965 · 發表於 2014-4-4 11:46:18

本帖最後由 965 於 2014-4-4 11:49 編輯

Again, depends how much you want to spend... Higher Amp esc offer lower resistance .... Which is very important in the old day ... A 360A brushed esc may offer 2/3 second more run time vs a 180A brushed esc... But not as magnify today.

If you can only run 2s, and using a ~5000kv 4pole motor, then yes, u need a 100A plus esc...

965 · 發表於 2014-4-5 02:45:41

U mean brushed or brushless?

		自動登錄	找回密碼
密碼			新玩家註冊