Hyperion 720i 問題

小弟用緊Hyperion 720i Duo 差機。通常用來义2S電。最近發現 channel 1間中义電义到80%左右會出現output voltage too high error.
請問有無師兄知道係乜嘢地方出咗問題。多謝幫忙提點一下。謝謝。

有冇插平衡頭？

儲定錢買叉機

vincenthk052005 發表於 2017-4-11 09:02
有冇插平衡頭？

當然有啦！唔係點可以义到80%呢？

victorhk 發表於 2017-4-11 09:10
儲定錢買叉機

多謝師兄廢苦之言。

是否確認义機壞了？

It is only due to the connectors bad contact, change all the connectors.

RGear 發表於 2017-4-11 10:24
It is only due to the connectors bad contact, change all the connectors.

唔該師兄，我試試先！

RGear 發表於 2017-4-11 10:24
It is only due to the connectors bad contact, change all the connectors.

Thank you Ching.

我換咗D插頭之後就正常返了。謝謝你！

andyccf2004 發表於 2017-5-29 01:39
Thank you Ching.

我換咗D插頭之後就正常返了。謝謝你！

Good ! Because I also faced this problem before. This charger is very reliable and still one of the best performance in the market

我都用緊，暫時無乜問題

我亦剛剛買咗這部差機，因對上一部也是Hyperion charger,是2010買的，除了當年冇storage mode外，性能是很好，所以升級仍是用Hyperion!