1cell 玩 4Turn 脹電

levinng 發表於 2011-8-8 13:55

                               
登錄/註冊後可看大圖

回復 hardmankam 的帖子

1cell with 4T is superhot too.. which 2 cell you're using...

Actually I have 2 x 12仔: 1 link and 1 t-bar
1. link car I am using 2xA123 + 10.5 + boost
2. t-bar I am using BY energy softpack, 4500/25c.  (I have to raise the battery 3-4mm to clear the t-bar in the middle)

If you have the link car, most c-hing will use 1/18 2s 1800mah battery to play.

Hobbywing 120A +3.5R+ 1S IP 40c 我無事喎！
時間同齒比唔岩！或者你有無磨呔（有Ｄ好大口徑）

回復 dragonofgreen 的帖子

可唔可以share 下個ESC setting?

回復 levinng 的帖子

出廠設定咋！齒比64  96/20  呔43mm

回復 levinng 的帖子

I am also using 1S 50C+4T+Turbo(15) without any problem.

But you can try smaller gear ratio 96/18 with 45mm = 26-27mm rollout (in JV)

hm.... i dont have problem when trim down the speed before... i just thought my laptime is too slow at JV (15.45), so im pushing the limit.. maybe change 2 cell later, thanks chings

我rollout 43...tire 50mm gear 26/94 silverbacks 漲晒不過ip電就冇事等改玩3 cell

回復 billlkyy 的帖子

Ip 咁堅?

Ching, 我想問用1cell LIPO battery 放電, 應該要用几多 A 來放(discharge)?

回復 watsonliu 的帖子

5A

silverback電有問題脹電。