Futaba Syntherized Module 75Mhz KR 變 XX

將Jumper14 Short 埋, 就可以由 KR 版9條Channel改成 XX 版30條Channel...enjoy it

how you know?

上網揾下料...又自己顏究下咁law...

good

想問下有咩website可以睇下

原帖由 tom001 於 2007-3-13 23:56 發表
想問下有咩website可以睇下

http://www.rcbig.idv.tw/bbs/rcbig/show.asp?topage=1&bd=8&id=4242&totable=2

thank

原帖由 cowcowlee 於 2007-3-12 21:45 發表
將Jumper14 Short 埋, 就可以由 KR 版9條Channel改成 XX 版30條Channel...enjoy it

Sorry ! I dont know much about this, what is the advantages of this change from 9 channel to 30 channel ?
THK in advance

原帖由 rk2 於 2007-3-15 09:26 發表


Sorry ! I dont know much about this, what is the advantages of this change from 9 channel to 30 channel ?
THK in advance

for the KR verion, there are only 9 channel (72-80) you can assign, but the XX version can be assigned from 61 to 90, 30 of different channel totally, more channel, more chooses...right??  

原帖由 cowcowlee 於 2007-3-15 11:05 發表


for the KR verion, there are only 9 channel (72-80) you can assign, but the XX version can be assigned from 61 to 90, 30 of different channel totally, more channel, more chooses...right??  

thks, ic ic,

can (KR verion) RX using with your (XX version TX)?

原帖由 alanulst 於 2007-3-16 01:13 發表
can (KR verion) RX using with your (XX version TX)?

yes..but limited to channel 72-80 , not only the syntherized Rx, but also the traditional crystal Rx can be used..

btw recevier much harder to modify since the componets much more smaller then the TX...also I still don't know the tricks yet...