MB-4 TRUGGY

原帖由 Sazabi 於 2007-10-6 11:54 發表

                               
登錄/註冊後可看大圖

請問有無可能改到可以用4200(大電)呢？例如切開小小膠殼等方法

沒空間，也沒必要，會太重。
不如換無刷+鋰聚，會更省電、速度更快！

Is the bathtub tray same size as the buggy?  Does 1/10 regular size servo fit into the tray?

woo....正唷

原帖由 byron.C 於 2007-7-22 21:24 發表

                               
登錄/註冊後可看大圖

什麼也不用改！我用了$40的海綿呔！所以不是原來的釘呔！

Does Tamiya 1/10 wheels fit this truggy?  Need any modification?

原帖由 Ang 於 2007-10-31 00:02 發表

                               
登錄/註冊後可看大圖

Does Tamiya 1/10 wheels fit this truggy?  Need any modification?

可以的！因為是用 12mm 六角....

原帖由 minimini 於 2007-10-6 14:34 發表

                               
登錄/註冊後可看大圖

but MRX-4 is not using the usual 1/10 hexa wheel adaptors........

  U are correct, so I brought a set of adaptor ( 六角) for my
1,  MRX-4 and
2,  Mini-Infeno and
3,  NB-16 GP

My three cars are also suitable for the "六角 set", so I can use 1/10 wheel  

原帖由 byron.C 於 2007-10-31 19:42 發表

                               
登錄/註冊後可看大圖

可以的！因為是用 12mm 六角....

Thank you for your prompt reply.

Another questions:
1. Can you install regular size servo?
2. Is the dog bones plastic?
3. Is there any part that is easy to break?

Please advise.

原帖由 Ang 於 2007-11-1 10:49 發表

                               
登錄/註冊後可看大圖

Thank you for your prompt reply.

Another questions:
1. Can you install regular size servo?
2. Is the dog bones plastic?
3. Is there any part that is easy to break?

Please advise.

1.我裝3003...不過要剪耳仔.....
2.是膠的.....有金屬，但很貴...唔抵...依類車for fun...不要太大改
3.轉向掛........不過我玩左 3幾個月都無事....

byron.C 兄,

After more than 3 months of running, is there any part starting to wear out?  How is the plastic dog bones holding out?  Is this truggy still available in KW St?

原帖由 Ang 於 2007-11-5 14:29 發表

                               
登錄/註冊後可看大圖

byron.C 兄,

After more than 3 months of running, is there any part starting to wear out?  How is the plastic dog bones holding out?  Is this truggy still available in KW St?

成日甩伺服器，可能我只是在家樓下放下狗，so 都無乜壞......
好似waigo 仲有貨的！

成日甩伺服器

Saw from your pic that the servo is sticked onto the tray?

現在是這樣整的...........

1500 電要拆左頭尾蓋先用到

byron.C 兄,

Can you measure the battery tray and post the measurement here?  I want to know whether it can take Li-Po pack of different sizes.

Thanks.

$40的海綿呔 Where can buy
thx.

原帖由 khho01 於 2007-11-28 14:51 發表

                               
登錄/註冊後可看大圖

$40的海綿呔 Where can buy
thx.

五金物料供應署

good.......