RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 3087|回復: 33
打印 上一主題 下一主題
收起左側

磨軑機一問

  [複製鏈接]
跳轉到指定樓層
1#
evojacky 發表於 2010-10-19 18:28:09 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
係咪有分手動同自動磨軑機ka?仲有要幾錢一部ar?
2#
hardmankam 發表於 2010-10-20 14:53:35 | 只看該作者
回復 1# evojacky

係咪有分手動同自動磨軑機ka? --> 係
仲有要幾錢一部ar? --> 手動 <$1000, 自動 >$1500
3#
 樓主| evojacky 發表於 2010-10-20 15:34:53 | 只看該作者
回復 2# hardmankam


    唔該哂,手動會吾好嗎?
4#
hardmankam 發表於 2010-10-20 16:49:47 | 只看該作者
手動都 ok. 當然全自動會方便好多.
最重要是配把靚刀! (如 Hudy)
5#
move7648 發表於 2010-10-20 19:27:44 | 只看該作者
how does tires turner operate?
6#
hardmankam 發表於 2010-10-20 20:21:05 | 只看該作者
you stick the foam tire in an adaptor.  it will rotate and there is a knife to cut the tire to a pre-set diameter.
7#
hardmankam 發表於 2010-10-20 20:22:22 | 只看該作者
8#
move7648 發表於 2010-10-20 22:10:05 | 只看該作者
明晒!

跑JV個場, 一套呔有幾長壽命?
9#
hardmankam 發表於 2010-10-20 22:20:56 | 只看該作者
1 day (or 6 packs of battery) uses about 3mm.

BUT the left and right tires will NOT wear at the same rate.  So its best to switch your L & R tires after 2 to 3 runs.
10#
move7648 發表於 2010-10-20 22:23:53 | 只看該作者
so 1 set tires can least for around 2 days
11#
hardmankam 發表於 2010-10-21 00:42:57 | 只看該作者
Speedmind tires are very thick... about 55mm to begin.  so it will last you ~ 4 days
Jaco, excced, and ATS are much thinner, about 50mm to begin, so ~ 2 days

at JV, front tires wear much faster than rear tires.
12#
Buzzcow 發表於 2010-10-21 01:27:41 | 只看該作者


at JV, front tires wear much faster than rear tires.

totally agree!
13#
hardmankam 發表於 2010-10-21 12:21:56 | 只看該作者
回復 10# move7648

While thick tires give you more runs, it is easier to chunk (爆/裂) making the tire very unstable or unusable.  You will have to repair (補軑) and will need a 磨軑機.

Of course professionals use 磨軑機 because of performance and setting purposes.  They usually use rear tires of 44-46mm and front tires of 42-44mm.  3 to 4 runs on later, they will throw them away.
14#
 樓主| evojacky 發表於 2010-10-21 17:30:44 | 只看該作者
回復  move7648

While thick tires give you more runs, it is easier to chunk (爆/裂) making the ti ...
hardmankam 發表於 2010-10-21 12:21



    如果一買返離得48mm尾軑 其實都算薄la
可以唔用磨軑機都可以wo?
15#
hardmankam 發表於 2010-10-21 18:22:50 | 只看該作者
本帖最後由 hardmankam 於 2010-10-21 18:27 編輯

yes, these are called 'pro cut' tires!  (or race ready)
But pro drivers still think 48mm is too thick.  They need to trim 2mm to '開軑'.
16#
 樓主| evojacky 發表於 2010-10-21 19:30:01 | 只看該作者
本帖最後由 evojacky 於 2010-10-21 19:33 編輯

回復 15# hardmankam


    跑一排電都無左2mm la
其實有無咩脾子係好用d呢食地d
17#
hardmankam 發表於 2010-10-21 22:12:13 | 只看該作者
回復  hardmankam


    跑一排電都無左2mm la
其實有無咩脾子係好用d呢食地d
evojacky 發表於 2010-10-21 19:30


Jaco is good.
18#
 樓主| evojacky 發表於 2010-10-21 23:05:09 | 只看該作者
回復 17# hardmankam

tomorrow try sin i have buy it ar!!!
19#
Buzzcow 發表於 2010-10-21 23:16:17 | 只看該作者
回復  hardmankam

tomorrow try sin i have buy it ar!!!
evojacky 發表於 2010-10-21 23:05


You can found jaco? seems no stock wor...
20#
 樓主| evojacky 發表於 2010-10-22 00:28:38 | 只看該作者
本帖最後由 evojacky 於 2010-10-22 00:29 編輯

回復 19# Buzzcow

u can use ATS for front....Jaco for rear
i buy it in [紅星]...ar
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-28 10:42 , Processed in 0.035213 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表