想玩蛇的朋友,看後會否要再考慮呢 ?

今天在jv拍的....那師兄只是和一大腳輕微碰撞後.....
以為rim會比較大損傷...點知.......

唔明....

尾hub灣了.....

今天在jv拍的....那師兄只是和一大腳輕微碰撞後.....
以為rim會比較大損傷...點知.......
abcde 發表於 2010-11-7 07:37 PM

                               
登錄/註冊後可看大圖

C兄哩部係唔係Pro Ten黎架 ? 輕微碰撞就咁傷真係唔好彩!

食正嘜都頂唔順既

部車是坐我隔離的12仔蛇.....
佢初玩後驅..巳玩得比較小心的了..見佢和大腳微微撞了一下..以為只是尾rim灣了..點知尾hub都灣埋.....蛇的金屬料無理由咁架....我聽人講asso 野巳經無以前咁好....點解連蛇都咁.....

食正嘜都頂唔順既
Q太郎 發表於 2010-11-7 20:20

                               
登錄/註冊後可看大圖

咁右係....

so hurt~~~~~~~~

impossible... this is too weak...

部車是坐我隔離的12仔蛇.....
佢初玩後驅..巳玩得比較小心的了..見佢和大腳微微撞了一下..以為只是尾rim灣 ...
abcde 發表於 2010-11-7 20:22

                               
登錄/註冊後可看大圖

ching,我玩960-07蛇,d萬向系Hudy做,膠料系荷蘭做,
但自960-08開始,所有平地蛇d零件(buggy例外)己經轉了X球,在大陸廠做,所以d質量很差,d960-08蛇,新車d啤呤己不順,油缸漏气(包括733),膠料很弱,d質量差但價錢和x-ray差不多,所以我己冇玩蛇了

That's too bad.  

There are so many cars in JV; touring, monster, slash, buggy, 1/12, M, FF with different levels.  If there are many cars on the track, I usually stop @ pit and wait until there are less cars.

ching,我玩960-07蛇,d萬向系Hudy做,膠料系荷蘭做,
但自960-08開始,所有平地蛇d零件(buggy例外)己經轉了 ...
winclearly 發表於 2010-11-7 22:21

                               
登錄/註冊後可看大圖

agree.  Their quality used to be very good......  my friends s120 have same issue.  And the center thread for the main shaft pull out only after few runs......

haa.. it seems no good quality 12 son now. still any good quality 12son out there? Xray?

haa.. it seems no good quality 12 son now. still any good quality 12son out there? Xray?
airyu 發表於 2010-11-9 09:57

                               
登錄/註冊後可看大圖

have  buy back that parts (right hub) ?

哩"post"真係,

你玩 "蛇"; "蛇"玩你.  
咁講, "蛇 proten pancar" 又點呢？

回復 14# abcde


    i have ordered la, if world model have stock,, i should get in today..

好明顯,質料差左好多....

Everything is made in China now!! SAD!

Made in china is not the problem, it's the quality control.
It is obvious that the alloy is low grade.

宜家d野咁化學架咩...