TA01 變身(還原)Top Force

所需配料
- TA01 兩架(因為Top Force係前後銖乂，TA01只有後銖乂，所己耍兩架TA01)
- 星星Manta Ray/ TA01 option ニ樓版 x 1
- Top Force (or Manta Ray) Part D x 2
- Top Force shell (多謝Susie兄幫手bid)
- 70mm狗骨 x 4
- 前80mm and 後90mm shocks (因為而現成shocks响手，用DF03原裝前後shocks. i.e.  前70mm and 後90mm)
- Buggy Tryes

原帖由 bigbigboy 於 2008-5-4 20:06 發表

                               
登錄/註冊後可看大圖

How much spend for your project?

Shell = 350
Dog bone = 40 x 2
Part D ~ 40 x 2
Total = 510

原帖由 agentjerry 於 2008-5-4 17:17 發表

                               
登錄/註冊後可看大圖

where u could find 2 old TA01?

I bought them in 1993.

原帖由 tamiyafan 於 2008-5-4 21:37 發表

                               
登錄/註冊後可看大圖

好車!但仲要配尾翼架喎。

The shell comes with 尾翼

原帖由 move7648 於 2008-5-5 09:20 發表

                               
登錄/註冊後可看大圖

may i know where can find 頭尾油壓架!??
thanks!

They come with the Tamiya option graphite 2-layer board kit

原帖由 minimini 於 2008-5-5 09:57 發表

                               
登錄/註冊後可看大圖

bro Ryan........what color are you going to paint ??.......

I am thinking. I don't like to original green. However, for a vintage car, it should be in the "Tamiya planned" green.

Any idea ?

原帖由 move7648 於 2008-5-16 14:23 發表

                               
登錄/註冊後可看大圖

Bro Ryan

could you please check with your Top Force and DF03
and advise if the front universal can use the same?

thanks!!

Bro move7648,

1. The front hub of TA01 (in either red or black) and Top Force are the same. This front hub is designed for putting 2 5x11mm bearings to hold the dog bone cup or universal. You can put the DF03 dog bone in Top Force and, of course, can put the DF03 universal drive shaft in Top Force.

2. The front hub of TA02 (in either blue or black) is same as the one in CC01 / FF01. It is designed for putting 1 5x11mm bearing and a 10x15mm bearing to hold the dog bone cupe or universal.

原帖由 stig 於 2008-5-16 14:26 發表

                               
登錄/註冊後可看大圖

諗好用咩色未啊ryan兄 =]

As a vintage car, I think I have no choice, go for the ugly Tamiya planned green.